Owner's Manual
6 7
Assembly: Aach the wheels
❶ Aach the gear wheel.
• Firmly press the gear wheel into the gear
box (located under the body in the wheel
well) unl the wheel is completely inserted
into the gearbox
• Insert a washer onto the rear axle unl it
meets the wheel
• Fasten the wheel nut onto the end
of the axle. Do not ghten the wheel
nut at this me
❷ Aach the opposite rear wheel.
• Slide a washer onto the front axle unl it
reaches the notch on the axle.
• Insert the wheel onto the axle unl it
meets the washer
• Slide a second washer onto the axle unl it
meets the wheel
• Using the two wrenches you removed from
the rear axle ghten each rear wheel nut,
turning in opposite direcons at the same
me.
❸ Aach the front wheels.
• Slide a washer onto the front axle unl it
reaches the notch on the axle.
• Insert the wheel onto the axle unl it
meets the washer
• Slide a second washer onto the axle unl it
meets the wheel
• Using the two wrenches you removed from
the rear axle ghten each wheel nut.
❹ Aach the hubcaps caps.
• Align the tabs of the hubcaps with the slots
in the wheel rim and press the hubcaps in
unl the hubcap snaps into place
Follow the assembly steps in the order listed below.
❷
❸
❸
❹
❹
❹
❹
The wrench and the
wheel nut come
aached to the axle
❶