Owner's Manual

8 9
❶ Aach the steering wheel.
• Remove the nut and bolt
from the steering wheel
• Connect the wire
connectors coming from
the steering column to the
wires on the steering wheel
• Insert the steering wheel
over the steering column
• Insert the nut into the hex
shape opening on the
steering wheel
• Insert the bolt through the
steering wheel and steering
column and fasten into
the nut
❷ Aach the windshield.
• Insert the tabs of the
windshield down into the
tabs of the windshield slots
• Pull up on the windshield
to make sure that it is
completely inserted
❸ Aach the mirrors.
• Press the end of the
mirrors into the mirror
slot located on the door.
Follow the assembly steps in the order listed below.
Follow the assembly steps in the order listed below.
Assembly: Aach the steering wheel, windshield and mirrors
Make the one-me baery connecon and aach the seat
Tip! Remove the nut and
bolt before you aach the
steering wheel.
❶ Aach the baery wire
connectors
• Connect the red wires
coming from the gearbox
to the wires coming from
the baery
❷ Aach the seat
• Insert the tabs on the
back of the seat into the
slots on the back of the
baery compartment
• Fasten with two screws
❷
❸
❸
❶
❶
❷