Assembly Instructions

6 7

Assembly

Follow the assembly steps in the order listed below.

❶ Ensure the

gearbox is completely inserted

into the opening in the wheel well.

❷

rear wheel

assembly to the rear axle.

❸

front wheel

assembly to the front axle.

❹ Insert the steering wheel over the end of

the steering column. Fasten with the nut

and bolt. Note: Connect the wire connector

from the steering wheel to the wires

connector coming from steering column.

❺ Place each mirror on the mirror bracket,

mirror are aligned. Fasten the mirror to the

bracket using the small cap screw.

❻

Before

❼ Fasten the seat to the body using the two

❽ charge

❷

❸

❺

❶

Insert the hubcap tabs

into the 4 slots on the

wheel inset.

wrench on each wheel bolt and

simultaneously turn the wrenches

❼

❹

Remove the nut and bolt from the steering wheel

BEFORE performing Step 4.

PAGE 1
Assembly Follow the assembly steps in the order listed below. ❼ ❶ Ensure the gearbox is completely inserted into the opening in the wheel well. ❷ rear wheel assembly to the rear axle. ❸ front wheel assembly to the front axle. wrench on each wheel bolt and simultaneously turn the wrenches ❹ Insert the steering wheel over the end of the steering column. Fasten with the nut and bolt. Note: Connect the wire connector from the steering wheel to the wires connector coming from steering column.