PTV3606 SERVICE MANUAL COLOR TELEVISION RECEIVER ORIGINAL MFR’S VERSION A Design and specifications are subject to change without notice.
PTV3606 SERVICE MANUAL COLOR TELEVISION RECEIVER ORIGINAL MFR’S VERSION A Design and specifications are subject to change without notice.
SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual. 2. AVOID AN ELECTRIC SHOCK There is a high voltage part inside. Avoid an electric shock while the electric current is flowing.
CONTENTS SERVICING NOTICES ON CHECKING .......................................................................................................... A1-1 HOW TO ORDER PARTS ............................................................................................................................... A1-1 IMPORTANT .................................................................................................................................................... A1-1 CONTENTS ....................................
GENERAL SPECIFICATIONS G-1 TV System CRT CRT Size / Visual Size CRT Type Deflection Magnetic Field BV/BH 14 inch / 335.4mmV Normal 90 degree +0.45G/0.18G PAL 1Speaker Bottom 3 Inch 8 ohm 1.0 W 0.8 W Yes U.K.
GENERAL SPECIFICATIONS Nicam ST Tone 1/2 Pin Code AV Skip Channel Hotel Lock Sleep Timer Sound Mute G-8 OSD Language G-9 Clock and Timer G-10 Remote Control G-11 Features Sleep Timer No No No Yes Yes Yes Max Time Step Program(On Timer / Off Timer) On/Off Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Glow in Dark Remocon Format Custom Code Power Source Voltage(D.
GENERAL SPECIFICATIONS VM Circuit Full OSD Unitext Fastext Top Text Premiere Comb Filter No No Yes No No No No Lines G-12 Accessories Auto CH Memory Auto Set Up Stable Sound FBT Leak Test Protect Hotel Lock Power ON Memory Owner's Manual Yes No No No No Language w/Guarantee Card Remote Control Unit Rod Antenna No Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet AC Plu
GENERAL SPECIFICATIONS Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material Dimensions W x D x H(mm) Design Description of Origin Drop Test G-17 Material G-18 Environment Height (cm) Container Stuffing Cabinet Cabinet Front Cabinet Rear PCB Non-Halogen Demand Eyelet Demand Pb Free Lead-free Solder Other Cd Free A3-4 ------ Sets /-x -- x -No Yes Double/Full Color 440 x 408 x 380 As per Buyer's No Natural Dropping At 1 Corner / 3 Edges / 6 Surfaces 62 866 Sets/40' contain
DISASSEMBLY INSTRUCTIONS 3. After one side is removed, pull in the opposite direction to remove the other. 1. REMOVAL OF ANODE CAP Read the following NOTED items before starting work. * * NOTE After turning the power off there might still be a potential voltage that is very dangerous. When removing the Anode Cap, make sure to discharge the Anode Cap's potential voltage. Do not use pliers to loosen or tighten the Anode Cap terminal, this may cause the spring to be damaged.
DISASSEMBLY INSTRUCTIONS 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using a tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 2-3.) 2. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC REMOVAL NOTE 1. Put the Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage. (Refer to Fig. 2-1.
DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thintip Soldering Iron. (Refer to Fig. 2-8.) 1. Take care of the polarity of new IC and then install the new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily. (Refer to Fig. 2-5.) Thin-tip Soldering Iron IC Soldering Iron Fig. 2-8 5.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key for more than 2 seconds. Set Key Remocon Key Operations VOL. (-) MIN 0 Reset the user setting items (PICTURE, VOLUME and LANGUAGE) to the initial state for delivery. VOL. (-) MIN 1 Initialization of the factory. NOTE: Do not use this for the normal servicing. POWER ON total hours is displayed on the screen.
WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. INI +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F 00 --- 00 00 00 00 19 60 40 00 41 00 01 03 00 00 00 10 10 00 80 80 80 00 00 --- --- --- --- --- --- --- --- --- Table 1 1. Enter DATA SET mode by setting VOLUME to minimum. 2.
ELECTRICAL ADJUSTMENTS 1. BEFORE MAKING ELECTRICAL ADJUSTMENTS 2. BASIC ADJUSTMENTS Read and perform these adjustments when repairing the circuits or replacing electrical parts or PCB assemblies. 1. Place the set with Aging Test for more than 15 minutes. 2. Receive the UHF (63 ± 1dB). 3. Connect the digital voltmeter between the TP002 and the (GND) of TU001. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (01) on the remote control to select "RF AGC". 5. Press the VOL.
ELECTRICAL ADJUSTMENTS 2-7: HORIZONTAL POSITION 2-11: COLOR CENT 1. Receive the monoscope pattern. 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (08) on the remote control to select "H POSI(50)". 4. Press the VOL. UP/DOWN button on the remote control until the SHIFT quantity of the OVER SCAN on right and left becomes minimum. 5. Receive the monoscope pattern of NTSC. 6.
ELECTRICAL ADJUSTMENTS 2-14 : Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below. NO.
ELECTRICAL ADJUSTMENTS 3. PURITY AND CONVERGENCE ADJUSTMENTS 3-3: STATIC CONVERGENCE NOTE Adjust after performing adjustments in section 3-2. 1. Turn the unit on and let it warm up for at least 30 minutes before performing the following adjustments. 2. Place the CRT surface facing east or west to reduce the terrestrial magnetism. 3. Turn ON the unit and demagnetize with a Degauss Coil. 1. Receive the crosshatch pattern from the color bar generator. 2.
ELECTRICAL ADJUSTMENTS 4.
BLOCK DIAGRAM J1001 HEADPHONE_JACK 2 TU001 SDA SCL 4 5 9 CH UP IF 11 CHROMA IC IC201 STV2246C AGC 1 VIF PRE. AMP VOL UP 3 A_MUTE 56 KEY IN OS101 CF202 SAW FILTER 5 4 6 35 OSD_G OSD_B 15 34 OSD_B 37 OSD_BK 42 X1/VAMP/CHR_OUT B.OUT 48 30 25 B_EXT/U_EXT 31 G.
PRINTED CIRCUIT BOARDS MAIN/CRT (INSERTED PARTS) SOLDER SIDE J1001 HS501 HS402 L501 C504 C527 Q501 C443 C524 1 2_ 50 C 02 P5 SW102 C 2B B 80 D 02 C P8 SW101 W033 X101 W055 W801 W015 C1007 W040 L103 W023 W022 W018 IC101 R1011 W065 C1005_1 C1003 CP1001 W079 R1009 C613 R422 C1001 W014 R128 W061 CD802A X601 W029 C115 R129 D603 R138 W008 D608 R646 L101 W017 W030 W021 CP802A L601 B1001 W016 HS101 W024 D607 C610 R1010 D102 W064 W057 W013 R112 C131_1 C
F-3 R217 R625 Q202 C806 R607 Q201 R007 C001 Q616 R648 Q204 R215 C007_1 C006 C605_1 C609 R214 R515 R104 R709 C615 R608 C616 R636 R645 R221 R219 R702 C201 C215 C614_1 C207 R640 R218 C624_1 C205 R638 C202 C625 C213_1 C601 C218 C612 C221 R639 R606 R714 R715 R713 C108 C109 R643 C703_1 C701 Q510 C413 Q605 C603 R115 R630 R629 R628 C620 C619 C618 R644 R201 Q615 C607 R622 Q403 R208 R601 R618 C212_1 C112 C101 R114 C119 R143 R204 C114 R144 R145 R146 R147 R142 R203 C10
A B C D E F G H MICON/TUNER SCHEMATIC DIAGRAM UE25-B58D TU/RGB (BBE-H) (ATS) PROTECT P3.5 P3.4 V_SYNC OSD_G H_SYNC OSD_R 0.2 39 0 OSD_FB AVDD1 37 PXFM SDA JTRSTO SCL 36 VDD 35 AGND JTDO 34 33 CVBS2 32 JTMS AVDD3 31 R111 HS101 763WSA0087 2.1 13 C006 100P CH 50V 1 KA R006 15K C003 100K R005 100 3.8 R004 100 0.01 F R003 10uH 0305 C007_1 4.9 L001 6.3V 470 YK NC NC 4.0 12 2 1 AGC 3 ADRES 4 SCL 5 SDA 6 V.
A B C D E F G H CHROMA/SIF/VIF/21PIN SCHEMATIC DIAGRAM (MAIN PCB) 11 VCO COIL L207 3700005 1K R203 1.2K 1K R219 CF201 BUFFER Q202 2SC2412K 2.2 13 TPSRA6M00B00-A0 390 R204 L202 7.9 2.9 R217 3.3uH 0305 C203_1 0.022 F P.CON+8V R621 W823 L204 18uH SAW FILTER CF202_1 J1951M IN IN G OUTOUT 1 2 3 4 5 82 R201 0.8 10 KA 560 1/4W 560 L203 1.5uH R202 R215 16V C212_1 VIF PRE.AMP Q201 KTC3881S-RTK 1.5 B R214 CF204 FROM POWER MKT41.5MA110P 0.001 2.2K 0.27uH 6 6.
A B C D E F G H SOUND AMP/FRONT AV SCHEMATIC DIAGRAM (MAIN PCB) 8 8 7 7 6 6 29 3.5 6 0 3.4 7 8 + 5 4 3 5.1 - 2 0 SOUND AMP IC IC1001 AN7511 8.2 5 1 0.3 CP1001 TID-X02P-B2 BLACK 2 RED 1 3.9 R1011 C1002 47K 1/4W 5 SPEAKER 2 1 47P CH FROM CHROMA/SIF/VIF/21PIN SP1001 SA08A05BWC 2 C1009 C1007 R1010 16V 10 KA 33 1/2W 3 0.0047 B 47K R1006 0.0022 B1001 W4BRH3.5X6X1.
A B C D E DEFLECTION/CRT SCHEMATIC DIAGRAM F CP802A B2013H02-6P 8 H CP802B B2013H02-6P PROTECT 1 1 PROTECT CUT OFF CUT OFF 2 2 GND 3 3 GND R.OUT R.OUT 4 4 R.OUT G.OUT G.OUT 5 5 G.OUT B.OUT B.OUT 6 6 B.OUT FROM/TO CHROMA/SIF/VIF/21PIN G (MAIN PCB) 8 VAMP GND 6 0 D809 1SS133 D808 1SS133 R814 1.2K 1/4W 270 270 C806 470P B C805 R816 1/4W 1.2K R811 R815 2.7 470P B 270 1/4W R813 95.4 6 YK C448 250V 10 R409 V_POSI VR401 2.
A B C D E F G H POWER SCHEMATIC DIAGRAM (MAIN PCB) 8 8 TO SOUND AMP/FRONT AV GND 7 7 TO DEFLECTION/CRT GND C517 P.CON+8V 2KV 0.001 R D510 W812 +B RU2AM-EIC 5 0 14 D513 21DQ09N 0 16 2 13.06 17 1 0 18 NC SW D511 R526 R507 1N4937 100 1/4W 2.2K MTZJ12B R508 4.2 10K B C W825 POWER 5.1 C508 R524 SB140-EIC SB140-EIC D515 D512 0.1 P.CON SW Q510 KRC103SRTK0 4.
WAVEFORMS MICON/TUNER 0.5µs 1.00V 1 10ms 1.00V 2 20µs 1.00V 3 20µs 1.00V 4 CHROMA/SIF/VIF/21PIN 50µs 20µs 100mV 0.50V 6 11 50µs 100mV 2ms 200mV 7 12 20µs 1.00V 50µs 0.50V 13 8 0.2ms 1.00V 20µs 1.00V 9 14 50µs 0.2ms 20µs 100mV 1.00V 100mV 5 16 10 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 10ms 10ms 1.00V 1.00V 10.0V 17 23 35 20µs 20µs 20µs 100mV 200mV 10.0V 18 24 36 SOUND AMP/FRONT AV 20µs 1.00V 500us 500mV 20µs 5.0V 19 29 37 DEFLECTION/CRT 20µs 1.00V 10ms 1.00V 2µs 200V 20 33 38 20µs 10ms 20µs 1.00V 10.0V 50V 21 34 39 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 50V 40 20µs 50V 41 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
MECHANICAL EXPLODED VIEW 106 206 206 206 109 110 201 206 207 102 110 J801 207 108 PCB110 (CRT PCB ASS'Y) 206 L503 207 105 FB401 104 207 V801 203 TU001 204 204 103 107 205 205 201 101E PCB010 (MAIN PCB ASS'Y) 201 202 101G 101F 101C 201 201 101D 101B SP1001 101A 101 I-1
MECHANICAL REPLACEMENT PARTS LIST REF. NO. PART NO. 101 101A 101B 101C 101D 101E 101F 101G A3M421I720 701WPJC340 713WPAA048 713WPAA111 735WPA0396 735WPBA808 8995034000 725000A063 CABINET,FRONT ASSY CABINET,FRONT GUIDE,REMOCON GLASS LED SPEAKER,HOLDER BUTTON,FRAME CORD CLIP UL CO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. ! ! ! ! ! ! ! ! ! ! ! ! ! PART NO. DESCRIPTION RESISTORS R411 R418 R424 R429 R447 R501 R502 R503 R516 R517 R803 R805 R807 R3X28A151J R3X28B6R8J R3X181181J R635815R6J R635U2680J R002T2155J R3X181221J R63581R22J R3X181010J R002T4155J R3X181153J R3X181153J R3X181153J R.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
SPEC.NO. M3M4-21I O/R NO.
SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual. 2. AVOID AN ELECTRIC SHOCK There is a high voltage part inside. Avoid an electric shock while the electric current is flowing.
CONTENTS SERVICING NOTICES ON CHECKING .......................................................................................................... A1-1 HOW TO ORDER PARTS ............................................................................................................................... A1-1 IMPORTANT .................................................................................................................................................... A1-1 CONTENTS ....................................
GENERAL SPECIFICATIONS G-1 TV System CRT CRT Size / Visual Size CRT Type Deflection Magnetic Field BV/BH 14 inch / 335.4mmV Normal 90 degree +0.45G/0.18G PAL 1Speaker Bottom 3 Inch 8 ohm 1.0 W 0.8 W Yes U.K.
GENERAL SPECIFICATIONS Nicam ST Tone 1/2 Pin Code AV Skip Channel Hotel Lock Sleep Timer Sound Mute G-8 OSD Language G-9 Clock and Timer G-10 Remote Control G-11 Features Sleep Timer No No No Yes Yes Yes Max Time Step Program(On Timer / Off Timer) On/Off Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than Unit Glow in Dark Remocon Format Custom Code Power Source Voltage(D.
GENERAL SPECIFICATIONS VM Circuit Full OSD Unitext Fastext Top Text Premiere Comb Filter No No Yes No No No No Lines G-12 Accessories Auto CH Memory Auto Set Up Stable Sound FBT Leak Test Protect Hotel Lock Power ON Memory Owner's Manual Yes No No No No Language w/Guarantee Card Remote Control Unit Rod Antenna No Loop Antenna Terminal U/V Mixer DC Car Cord (Center+) Guarantee Card Warning Sheet Circuit Diagram Antenna Change Plug Service Facility List Important Safeguard Dew/AHC Caution Sheet AC Plu
GENERAL SPECIFICATIONS Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material Dimensions W x D x H(mm) Design Description of Origin Drop Test G-17 Material G-18 Environment Height (cm) Container Stuffing Cabinet Cabinet Front Cabinet Rear PCB Non-Halogen Demand Eyelet Demand Pb Free Lead-free Solder Other Cd Free A3-4 ------ Sets /-x -- x -No Yes Double/Full Color 440 x 408 x 380 As per Buyer's No Natural Dropping At 1 Corner / 3 Edges / 6 Surfaces 62 866 Sets/40' contain
DISASSEMBLY INSTRUCTIONS 3. After one side is removed, pull in the opposite direction to remove the other. 1. REMOVAL OF ANODE CAP Read the following NOTED items before starting work. * * NOTE After turning the power off there might still be a potential voltage that is very dangerous. When removing the Anode Cap, make sure to discharge the Anode Cap's potential voltage. Do not use pliers to loosen or tighten the Anode Cap terminal, this may cause the spring to be damaged.
DISASSEMBLY INSTRUCTIONS 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using a tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 2-3.) 2. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC REMOVAL NOTE 1. Put the Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage. (Refer to Fig. 2-1.
DISASSEMBLY INSTRUCTIONS INSTALLATION 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thintip Soldering Iron. (Refer to Fig. 2-8.) 1. Take care of the polarity of new IC and then install the new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily. (Refer to Fig. 2-5.) Thin-tip Soldering Iron IC Soldering Iron Fig. 2-8 5.
SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter the Service Mode, press both set key and remote control key for more than 2 seconds. Set Key Remocon Key Operations VOL. (-) MIN 0 Reset the user setting items (PICTURE, VOLUME and LANGUAGE) to the initial state for delivery. VOL. (-) MIN 1 Initialization of the factory. NOTE: Do not use this for the normal servicing. POWER ON total hours is displayed on the screen.
WHEN REPLACING EEPROM (MEMORY) IC If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. INI +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F 00 --- 00 00 00 00 19 60 40 00 41 00 01 03 00 00 00 10 10 00 80 80 80 00 00 --- --- --- --- --- --- --- --- --- Table 1 1. Enter DATA SET mode by setting VOLUME to minimum. 2.
ELECTRICAL ADJUSTMENTS 1. BEFORE MAKING ELECTRICAL ADJUSTMENTS 2. BASIC ADJUSTMENTS Read and perform these adjustments when repairing the circuits or replacing electrical parts or PCB assemblies. 1. Place the set with Aging Test for more than 15 minutes. 2. Receive the UHF (63 ± 1dB). 3. Connect the digital voltmeter between the TP002 and the (GND) of TU001. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (01) on the remote control to select "RF AGC". 5. Press the VOL.
ELECTRICAL ADJUSTMENTS 2-7: HORIZONTAL POSITION 2-11: COLOR CENT 1. Receive the monoscope pattern. 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (08) on the remote control to select "H POSI(50)". 4. Press the VOL. UP/DOWN button on the remote control until the SHIFT quantity of the OVER SCAN on right and left becomes minimum. 5. Receive the monoscope pattern of NTSC. 6.
ELECTRICAL ADJUSTMENTS 2-14 : Confirmation of Fixed Value (Step No.) Please check if the fixed values of the each adjustment items are set correctly referring below. NO.
ELECTRICAL ADJUSTMENTS 3. PURITY AND CONVERGENCE ADJUSTMENTS 3-3: STATIC CONVERGENCE NOTE Adjust after performing adjustments in section 3-2. 1. Turn the unit on and let it warm up for at least 30 minutes before performing the following adjustments. 2. Place the CRT surface facing east or west to reduce the terrestrial magnetism. 3. Turn ON the unit and demagnetize with a Degauss Coil. 1. Receive the crosshatch pattern from the color bar generator. 2.
ELECTRICAL ADJUSTMENTS 4.
BLOCK DIAGRAM J1001 HEADPHONE_JACK 2 TU001 SDA SCL 4 5 9 CH UP IF 11 CHROMA IC IC201 STV2246C AGC 1 VIF PRE. AMP VOL UP 3 A_MUTE 56 KEY IN OS101 CF202 SAW FILTER 5 4 6 35 OSD_G OSD_B 15 34 OSD_B 37 OSD_BK 42 X1/VAMP/CHR_OUT B.OUT 48 30 25 B_EXT/U_EXT 31 G.
PRINTED CIRCUIT BOARDS MAIN/CRT (INSERTED PARTS) SOLDER SIDE J1001 HS501 HS402 L501 C504 C527 Q501 C443 C524 1 2_ 50 C 02 P5 SW102 C 2B B 80 D 02 C P8 SW101 W033 X101 W055 W801 W015 C1007 W040 L103 W023 W022 W018 IC101 R1011 W065 C1005_1 C1003 CP1001 W079 R1009 C613 R422 C1001 W014 R128 W061 CD802A X601 W029 C115 R129 D603 R138 W008 D608 R646 L101 W017 W030 W021 CP802A L601 B1001 W016 HS101 W024 D607 C610 R1010 D102 W064 W057 W013 R112 C131_1 C
F-3 R217 R625 Q202 C806 R607 Q201 R007 C001 Q616 R648 Q204 R215 C007_1 C006 C605_1 C609 R214 R515 R104 R709 C615 R608 C616 R636 R645 R221 R219 R702 C201 C215 C614_1 C207 R640 R218 C624_1 C205 R638 C202 C625 C213_1 C601 C218 C612 C221 R639 R606 R714 R715 R713 C108 C109 R643 C703_1 C701 Q510 C413 Q605 C603 R115 R630 R629 R628 C620 C619 C618 R644 R201 Q615 C607 R622 Q403 R208 R601 R618 C212_1 C112 C101 R114 C119 R143 R204 C114 R144 R145 R146 R147 R142 R203 C10
A B C D E F G H MICON/TUNER SCHEMATIC DIAGRAM UE25-B58D TU/RGB (BBE-H) (ATS) PROTECT P3.5 P3.4 V_SYNC OSD_G H_SYNC OSD_R 0.2 39 0 OSD_FB AVDD1 37 PXFM SDA JTRSTO SCL 36 VDD 35 AGND JTDO 34 33 CVBS2 32 JTMS AVDD3 31 R111 HS101 763WSA0087 2.1 13 C006 100P CH 50V 1 KA R006 15K C003 100K R005 100 3.8 R004 100 0.01 F R003 10uH 0305 C007_1 4.9 L001 6.3V 470 YK NC NC 4.0 12 2 1 AGC 3 ADRES 4 SCL 5 SDA 6 V.
A B C D E F G H CHROMA/SIF/VIF/21PIN SCHEMATIC DIAGRAM (MAIN PCB) 11 VCO COIL L207 3700005 1K R203 1.2K 1K R219 CF201 BUFFER Q202 2SC2412K 2.2 13 TPSRA6M00B00-A0 390 R204 L202 7.9 2.9 R217 3.3uH 0305 C203_1 0.022 F P.CON+8V R621 W823 L204 18uH SAW FILTER CF202_1 J1951M IN IN G OUTOUT 1 2 3 4 5 82 R201 0.8 10 KA 560 1/4W 560 L203 1.5uH R202 R215 16V C212_1 VIF PRE.AMP Q201 KTC3881S-RTK 1.5 B R214 CF204 FROM POWER MKT41.5MA110P 0.001 2.2K 0.27uH 6 6.
A B C D E F G H SOUND AMP/FRONT AV SCHEMATIC DIAGRAM (MAIN PCB) 8 8 7 7 6 6 29 3.5 6 0 3.4 7 8 + 5 4 3 5.1 - 2 0 SOUND AMP IC IC1001 AN7511 8.2 5 1 0.3 CP1001 TID-X02P-B2 BLACK 2 RED 1 3.9 R1011 C1002 47K 1/4W 5 SPEAKER 2 1 47P CH FROM CHROMA/SIF/VIF/21PIN SP1001 SA08A05BWC 2 C1009 C1007 R1010 16V 10 KA 33 1/2W 3 0.0047 B 47K R1006 0.0022 B1001 W4BRH3.5X6X1.
A B C D E DEFLECTION/CRT SCHEMATIC DIAGRAM F CP802A B2013H02-6P 8 H CP802B B2013H02-6P PROTECT 1 1 PROTECT CUT OFF CUT OFF 2 2 GND 3 3 GND R.OUT R.OUT 4 4 R.OUT G.OUT G.OUT 5 5 G.OUT B.OUT B.OUT 6 6 B.OUT FROM/TO CHROMA/SIF/VIF/21PIN G (MAIN PCB) 8 VAMP GND 6 0 D809 1SS133 D808 1SS133 R814 1.2K 1/4W 270 270 C806 470P B C805 R816 1/4W 1.2K R811 R815 2.7 470P B 270 1/4W R813 95.4 6 YK C448 250V 10 R409 V_POSI VR401 2.
A B C D E F G H POWER SCHEMATIC DIAGRAM (MAIN PCB) 8 8 TO SOUND AMP/FRONT AV GND 7 7 TO DEFLECTION/CRT GND C517 P.CON+8V 2KV 0.001 R D510 W812 +B RU2AM-EIC 5 0 14 D513 21DQ09N 0 16 2 13.06 17 1 0 18 NC SW D511 R526 R507 1N4937 100 1/4W 2.2K MTZJ12B R508 4.2 10K B C W825 POWER 5.1 C508 R524 SB140-EIC SB140-EIC D515 D512 0.1 P.CON SW Q510 KRC103SRTK0 4.
WAVEFORMS MICON/TUNER 0.5µs 1.00V 1 10ms 1.00V 2 20µs 1.00V 3 20µs 1.00V 4 CHROMA/SIF/VIF/21PIN 50µs 20µs 100mV 0.50V 6 11 50µs 100mV 2ms 200mV 7 12 20µs 1.00V 50µs 0.50V 13 8 0.2ms 1.00V 20µs 1.00V 9 14 50µs 0.2ms 20µs 100mV 1.00V 100mV 5 16 10 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 10ms 10ms 1.00V 1.00V 10.0V 17 23 35 20µs 20µs 20µs 100mV 200mV 10.0V 18 24 36 SOUND AMP/FRONT AV 20µs 1.00V 500us 500mV 20µs 5.0V 19 29 37 DEFLECTION/CRT 20µs 1.00V 10ms 1.00V 2µs 200V 20 33 38 20µs 10ms 20µs 1.00V 10.0V 50V 21 34 39 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
WAVEFORMS 20µs 50V 40 20µs 50V 41 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram.
MECHANICAL EXPLODED VIEW 106 206 206 206 109 110 201 206 207 102 110 J801 207 108 PCB110 (CRT PCB ASS'Y) 206 L503 207 105 FB401 104 207 V801 203 TU001 204 204 103 107 205 205 201 101E PCB010 (MAIN PCB ASS'Y) 201 202 101G 101F 101C 201 201 101D 101B SP1001 101A 101 I-1
MECHANICAL REPLACEMENT PARTS LIST REF. NO. PART NO. 101 101A 101B 101C 101D 101E 101F 101G A3M421I720 701WPJC340 713WPAA048 713WPAA111 735WPA0396 735WPBA808 8995034000 725000A063 CABINET,FRONT ASSY CABINET,FRONT GUIDE,REMOCON GLASS LED SPEAKER,HOLDER BUTTON,FRAME CORD CLIP UL CO.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. ! ! ! ! ! ! ! ! ! ! ! ! ! PART NO. DESCRIPTION RESISTORS R411 R418 R424 R429 R447 R501 R502 R503 R516 R517 R803 R805 R807 R3X28A151J R3X28B6R8J R3X181181J R635815R6J R635U2680J R002T2155J R3X181221J R63581R22J R3X181010J R002T4155J R3X181153J R3X181153J R3X181153J R.
ELECTRICAL REPLACEMENT PARTS LIST REF. NO. PART NO.
SPEC.NO. M3M4-21I O/R NO.