User Manual

O
PERATING
M
ANUAL
FEATURES
KEY PAD OPERATION
SAFETY LABELING
•
PRESS
“
ON/OFF
”
TO TURN UNIT ON AND OFF.
HORIZONTAL 180 DEGREE LINE WILL BE ON.
•
PRESS
“
H
”
BUTTON ONCE FOR SECOND 180 DEGREE
HORIZONTAL LINEFOR FULL 360 DEGREE HORIZONTAL LINE.
•
PRESS
“
V1
”
FOR SINGLE VERTICAL LINE.
•
PRESS
“
V2
”
FOR SECOND VERTICAL .
LINE. NOTE: V1 AND V2 COMBINATION CREATES 90
DEGREE ANGLE CROSSLINES.
•
PRESS
“
OUTDOOR
”
TO PULSE ANY OF THE LINES AND
TRANSMIT SIGNAL TO THE PLS SLD LASER DETECTOR.
1 INDICATES UNIT IS ON
“
OUTDOOR
”
MODE LINES.
CAUTION: USE OF CONTROLS, ADJUST-
MENTS OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
PLS complies with US FDA
standards, 21 CFR, Subchapter J.
These labels are attached
to
every PLS laser. These are
not to be removed or defaced.
PLS• 2550 KERNER BLVD., SAN RAFAEL, CA 94901
8 0 0 6 0 1 4 5 0 0
AVOID EXPOSURE
LASER RADIATION
EMITTED FROM
APERTURES
PLS HVL 100 Line Laser
COMPLIES WITH FDA PERFORMANCE STDS.
21 CFR, SUBCHAPTER J
SERIAL NUMBER:
MFG’D:
CAUTION: LASER RADIATION WHEN OPEN. DO NOT
STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS. PATENT PENDING
REG. US PATENT OFFICE
PLS 2550 KERNER BLVD., SAN RAFAEL, CA 94901
CAUT I O N
LASER RADIATION
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
MAXOUTPUT POWER <1mW
WAVELENGTH 635-670nm
CLASS II LASER PRODUCT
WARNING LABEL
SIDE VIEW
TOP VIEW
ID# CERTIFICATION LABEL
PACIFIC LASER
SYSTEMS
The Professional Standard
•
4 TOP OPTIC
WINDOWS
•
4 SIDE OPTIC
WINDOWS
•
USE EITHER 4 AA
ALKALINE OR
NIMH BATTERIES
•
BATTERY DOOR
•
5/8 X 11 INSERT
IN BASE OF
EACH UNIT
• ON/OFF MENU SWITCH
•
WALL
BRACKET
•
PLS SLD
LASER
DETECTOR
•
*
REFERENCE
ADJUSTMENT KNOB
1
2
3
•
RECHARGEABLE
BATTERY PACK
*
Nottobeused to calculateangles.
2 INDICATES OUT OF LEVEL WHEN FLASHING. UNIT WILL
NOT EMIT LASER WHEN OUT OF LEVEL EXCEEDING 4
O
3 INDICATES POWERSWITCH IS ON.