Quick Start Guide

ManualsBrandsPACKARD BELL ManualsComputers & AccessoriesTablet PC with Keyboard

N1000: Quick Start Guide

In the box Buttons and ports

Quick Start Guide

N1000

cloudBook

Getting started

Using the touchpad

Function/Shortcut keys

Right

Click

POWER ON: Press and hold the POWER button until the

tablet turns on.

POWER OFF: Select Start > Power > Shut down.

The touchpad provides the functionality of a mouse. It

has a touch-sensitive surface that senses the motion and

Scroll:

slide them to scroll in any direction on

the page or program

Zoom:

then move them apart or closer to

zoom-in or zoom-out.

Switch program:

swipe to either side to switch between

open windows and programs.

To access the shortcuts of the Function keys, F1 through F12,

press & hold the Fn button and select the desired

Function key.

Quick Start Guide

N1000

cloudBook

Keyboard

10.1” tablet

Quick Start Guide

OTG cableCharger

1 2

3 4

Tablet (SIDE)

Wall outlet

Charger

Charging

Micro SD

card

Inserting a Micro SD card

The tablet supports Micro SD cards up to 256GB (not included).

To install a Micro SD card into the tablet, gently open the cover

and carefully insert the card as shown below into the card slot

until it clicks and locks into place.

To remove the Micro SD card, gently press it inward to eject.

• To dock the tablet to the keyboard, align the tablet and the

keyboard, then slide the tablet into the dock as shown below.

• To undock the tablet from the keyboard, ﬁrmly hold the

keyboard as shown below, then gently pull the tablet upwards.

Note:

1. The tablet will automatically recognize the keyboard when

docked properly.

2. If the tablet is wrongly docked then it may damage the keyboard

or tablet.

Keyboard

Tablet

The touchpad does not have a mechanical click. Tap to select.

Tap the touchpad

to select

Correct

Don’t push down

on the touchpad

Incorrect

IMPORTANT

Expanding the storage

Keyboard dock

Power button

OTG cable

(included)

USB

Type C

USB

mini

HDMI

You can connect a USB stick, mouse, or monitor to the tablet’s

USB and HDMI ports.

The included OTG cable allows you to create an additional USB

port via the Type C port of the tablet.

To connect the tablet to a TV or monitor, use a mini HDMI to

HDMI cable (not included)

USB, Type C, and HDMI Ports

Volume buttons

Front camera

Rear camera

Microphone

Headphone jack

Power button

USB type C (data only)

Pogo pins

Mini HDMI

USB port

DC charger port

Micro SD card slot

Stereo speakers

Touchpad

Windows 10 S Mode

Your laptop is shipped with Windows 10 S Mode which is a version

of Windows 10 that's streamlined for security and performance,

while providing a familiar Windows experience. To increase

security, it allows only apps from the Microsoft Store, and requires

Microsoft Edge for safe browsing.

For more info, visit

https://www.microsoft.com/en-us/windows/s-mode

Switching out of S mode

To increase security and performance, Windows 10 in S mode runs

only apps from the Microsoft Store. If you wa

nt to install an app

that isn't available in the Microsoft Store, you'll need to perma-

nently switch out of S mode. There's no charge to switch out of S

mode, but you won't be able to turn it back on. To switch out of S

mode follow the steps below .

1. On your PC running Windows 10 in S mode, open Settings >

Update & Security > Activation.

2. Find the “Switch to Windows 10 Home” or “Switch to Windows 10

Pro” section, then select “Go to the Store.”

Note: Don't select the link under "Upgrade your edition of Windows".

3. On the page that appears in the Microsoft Store (Switch out of S mode

able to install apps from outside the Microsoft Store.

Legal information

FCC Part 15:

This equipment has been tested and found to comply with the requirements for a Class B digital

device under Part 15 of the Federal Communications Commission (FCC) rules. These

requirements are intended to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or

encouraged to try to correct the interference by one or more of the following measures:

• Re-orient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

connected.

• Consult the dealer or an experienced radio/TV technician for help. Do not attempt to repair or

modify this equipment.

Warning

responsible for compliance could void the user’s authority to operate the equipment.

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.”

Shielded USB cables must be used with this unit to ensure compliance with the Class B FCC limits.

Information Regarding Exposure to Radio Frequency Energy

Your device is designed and manufactured not to exceed the emission limits for exposure to RF

energy set by the Federal Communications Commission of the United States (FCC). Information

http://www.fcc.gov/oet/ea/ after searching on the FCC ID for your Device, which can be found on

the back of the Device. If your electronic device has internal memory on which personal or other

dispose of your device to assure another party cannot access your personal data. Data

sanitization varies by the type of product and its software, and you may want to research the best

sanitization process for your device before disposal. You may also check with your local recycling

facility to determine their data sanitization procedures during the recycling process.

Battery Disposal & Recycle

This device contains a Lithium-ion battery. The battery must be recycled or disposed of properly.

Designed and distributed by Southern Telecom Inc. Brooklyn, NY 11220

Packard Bell

is a registered trademark of PBX Holding LLC.

All other trademarks and trade names are those of their respective owners.

1-800-822-8837

1-Year Limited Warranty

Territory: United States/Canada

LIMITED WARRANTY TO ORIGINAL CONSUMER

This product (including any accessories included in the original packaging) as

supplied and distributed new by an authorized retailer is warranted by Southern

Telecom, Inc. to the original consumer purchaser against defects in materials and

workmanship (“Warranty”) as follows:

To obtain warranty service:

Visit our website at www.southerntelecom.com

Click on Product Support

Select the Brand of your device

Select Service Request

Your product will be repaired or replaced, at our option, for the same or similar model

of equal value if examination by the service center determines this product is

claim with the carrier.

Warranty service not provided

This warranty does not cover damage resulting from accident, misuse, abuse, improper installation or

repairs this product. All products being returned to the authorized service center for repair must be suitably

packaged.

NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE EXPRESSLY

DESCRIBED ABOVE SHALL APPLY. DISTRIBUTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS

WARRANTY PERIOD STATED ABOVE. NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON,

FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON DISTRIBUTOR. REPAIR, REPLACEMENT,

OR REFUND OF THE ORIGINAL PURCHASE PRICE - AT DISTRIBUTOR’S SOLE DISCRETION - ARE THE EXCLUSIVE

REMEDIES OF THE CONSUMER. IN NO EVENT WILL DISTRIBUTOR OR ITS MANUFACTURERS BE LIABLE FOR ANY

INCIDENTAL, DIRECT, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES (SUCH AS, BUT NOT LIMITED

TO, DAMAGES FOR LOSS OF PROFITS, BUSINESS, SAVINGS, DATA OR RECORDS) CAUSED BY THE USE, MISUSE OR

INABILITY TO USE THE PRODUCT. EXCEPT AS STATED HEREIN, NO OTHER WARRANTIES SHALL APPLY.

NOTWITHSTANDING THE FOREGOING, CONSUMER’S RECOVERY AGAINST DISTRIBUTOR SHALL NOT EXCEED THE

PURCHASE PRICE OF THE PRODUCT SOLD BY DISTRIBUTOR. THIS WARRANTY SHALL NOT EXTEND TO ANYONE

OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE.

Some countries, states or provinces do not allow the exclusion or limitation of incidental or consequential

damages or allow limitations on warranties, so limitation or exclusions may not apply to you. This warranty

province. Contact your authorized retailer to determine if another warranty applies.

Click to see all the pre-installed apps.

After completing the Windows setup, the home screen

will be displayed.

mini HDMI cable

(not included)

Note: The device should be shut down through the Windows OS as

shown above. However, if you need to force the device to shut

down, press and hold the POWER button until the display turns oﬀ

and the device shuts down.

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with

Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause

undesired operation of the device

ADVERTENCIA IC

Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux

RSS (RSS) d'Innovation, Sciences et Développement économique Canada. Le

fonctionnement est soumis auxdeux conditions suivantes :

(1) Cet appareil ne doit pas causer d'interférences.

(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de

provoquer un fonctionnement indésirable de l'appareil.