Operation Manual

1 Power Switch

Slide to power on or off the device.

2 External GPS antenna

connector (MMCX

type)

If your car has a heat reflective/thermal windscreen, you may need to use

an external antenna to get better GPS reception.

3 Battery charging LED

Indicates the status of battery.

4 Touch screen

Read status and information on the screen. Tap the screen to enter

information

and navigate through the applications.

5 SD/MMC card slot

Insert an SD/MMC card to read maps, music, photos.

6 Volume up/down

Adjust the volume.

7 Car holder slots

Use to position your device in the car holder kit.

8 USB / Power connector

Use the supplied USB cable to connect the Compasseo to your computer

and exchange files or charge the battery, or connect the supplied car

adapter cable and plug the other end into the cigarette lighter to charge

the battery.

9 Earphone Jack

Connect earphones.

10 Battery lock switch

Use this switch to cut all power to the device. Note that this also resets

the device’s memory. You will have to perform the first start process again

(calibrate screen, settings, acquire GPS connection, etc.).

11 Reset button

Restart your device in case it stops responding or becomes unstable.

12 Speaker

Listen to route guidance instructions or enjoy your music.

To make the most of your Packard Bell Compasseo, download extra maps, get the latest firmware and

purchase accessories, make sure you visit the Packard Bell Website regularly on