Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
99999
Packard Bell EasyNote ME Disassembly Manual
9
2. Use the emergency eject hole to open the optical disk drive.
3. Pull the tray and take out the optical disk drive from the drive bay.
4. Remove the 2 screws securing the metal bracket and remove it from the drive.
Fig. 12 Removing metal bracket.
5. Release the tray cover on one side of the tray.
Fig. 13 Releasing tray cover (side).
6. Next release the tray cover on the bottom of the drive.
Fig. 14 Releasing tray cover (bottom).
7. Remove the cover and close the tray!
Note: When assembling the tray cover, first insert the left side (see Fig. 13) and then the right side.