Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
1212121212
Packard Bell EasyNote ME Disassembly Manual
12
3. Carefully release the brown clip securing the flat cable.
Fig. 19 Releasing button board flat cable.
4. Disconnect the flat cable from the button board (see Fig. 19).
LCD Assembly
To disassemble the LCD assembly, first remove the keyboard (see Keyboard
), disconnect the wireless
LAN antenna (see step 1 to 3 in Wireless LAN Adapter
), and then perform the following steps:
1. Disconnect the webcam cable.
Fig. 20 Disconnecting webcam cable.