Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
1515151515
Packard Bell EasyNote ME Disassembly Manual
15
2. Release the black clip and disconnect the touchpad flat cable.
Fig. 25 Location of touchpad connector.
3. Remove the 6 screws securing the cover.
Fig. 26 Location of cover screws.
4. Turn the notebook upside down
5. Remove the 16 screws securing the top cover.
Fig. 27 Location of top cover screws.
Note: One screw is located inside the hard disk drive compartment.