Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
1717171717
Packard Bell EasyNote ME Disassembly Manual
17
2. Take out the modem.
3. Carefully disconnect the cable from the modem.
RJ11 Connector (Optional)
To remove the optional RJ11 connector, first remove the modem (see Modem (Optional)
), and then
perform the following steps:
1. Clear the modem cable from the tape and clips securing the cable to the bottom cover.
Fig. 30 Clearing modem cable.
2. Take out the RJ11 connector bracket and cable.
Fig. 31 Location of RJ11 connector bracket.