Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
1818181818
Packard Bell EasyNote ME Disassembly Manual
18
Note: Ensure that you secure the modem cable tightly to the bottom cover to prevent damage or obstructing
the optical disk drive when inserting the drive.
Note: Keep the area next to the RJ11 connector (and DC jack) free, otherwise the top cover will not fit properly.
The area is meant for a speaker and the ferrites in the modem and DC jack cables (see Fig 30).
USB Board
To remove the USB board, first remove the top cover (see Top Cover
), and then perform the following
steps:
1. Remove the 2 screws securing the HDD board.
Fig. 32 Location of USB board cable and screw.
2. Disconnect the cable from the USB board (see Fig 32).
3. Lift out the USB board.