Operation Manual

2121212121
Packard Bell EasyNote ME Disassembly Manual
21
4. Remove the screw securing the inverter board.
Fig. 37 Location of inverter board screw and connectors.
5. Extract the inverter board.
6. Disconnect the cables from the inverter board (see Fig 37).
LCD Panel
To disassembly the LCD panel, first remove the LCD assembly (see LCD Assembly
), remove the LCD
cover (see steps 1 - 3 in Inverter Board
), and then perform the following steps:
1. Disconnect the cables from the inverter board (see Fig 37
).
Note: It may be easier to remove the inverter board entirely to get better access to the cables (see Inverter
Board).
2. Remove the screw securing the grounding cable.
Fig. 38 Location of screw securing grounding cable.
3. Lift out the LCD panel.
4. Remove the 4 screws on each side of the LCD brackets.