Operation Manual

2222222222
Packard Bell EasyNote ME Disassembly Manual
22
5. Remove the protective tape over the LCD cable.
Fig. 39 Location of protective tape.
6. Disconnect the LCD cable (see Fig 39).
Webcam
To remove the webcam, first remove the LCD assembly (see LCD Assembly
), remove the LCD cover
(see steps 1 - 3 in Inverter Board
), and then do the following:
1. Disconnect the cable from the webcam.
Fig. 40 Location of webcam connector.
2. Extract the webcam; it may be secured with glue and/or tape (see Fig. 40
).
Note: You may have to remove the LCD panel if you need to replace the webcam cable.
WLAN Antenna
To remove the wireless antenna, first remove the LCD panel (see LCD Panel
), and then do the following: