Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
55555
Packard Bell EasyNote ME Disassembly Manual
5
2. Pull the hard disk drive towards the right to disconnect the drive.
Fig. 3 Disconnecting and removing hard disk drive(s).
3. Take the drive out of its compartment as shown in Fig. 3
.
4. Remove the 2 screws on the metal bracket to separate it from the hard disk drive.
Fig. 4 Location of hard disk drive bracket screws.
Memory
To remove the memory installed, first remove the battery (see Battery
) and then perform the following
steps: