Operation Manual
Table Of Contents
- Packard Bell
- EasyNote ME
- Disassembly Manual
- Disassembly Manual
- Table of Contents
- About this Guide
- For More Information
- Technician Notes
- Disassembly
- Reassembly
- Required Tools
- Hazardous Voltage
- Avoid Electrostatic Discharge
- Power Supply Unit
- Battery
- Hard Disk Drive
- Memory
- Wireless LAN Adapter
- CPU Fan, Heat Sink and CPU
- Optical Disk Drive
- Keyboard
- Button Board
- LCD Assembly
- Top Cover
- Speakers
- Modem (Optional)
- RJ11 Connector (Optional)
- USB Board
- Main Board
- Inverter Board
- LCD Panel
- Webcam
- WLAN Antenna
- Notice
- Disassembly Manual
77777
Packard Bell EasyNote ME Disassembly Manual
7
2. Carefully disconnect the 2 wireless antenna cables. Take note of which coloured wire is
connected to which connector on the adapter.
Fig. 7 Location of antenna cable connectors and screws.
3. Remove the 2 screws securing the adapter (see Fig. 7); the adapter will eject upwards.
4. Take out the wireless LAN adapter from the slot.
CPU Fan, Heat Sink and CPU
To remove the CPU, first remove the battery (see Battery
) and then perform the following steps:
1. Remove the 8 screws securing the CPU compartment cover (see Fig. 5).
2. Remove the 2 screws holding the CPU fan.
Fig. 8 Location of CPU fan screws.