Operation Manual

88888
Packard Bell EasyNote ME Disassembly Manual
8
3. Disconnect the power cable and remove the CPU fan (see Fig. 8).
4. Turn the 5 screws securing the heat sink halfway loose in designated order.
Fig. 9 Location of heat sink screws.
5. Now the 5 screws completely loose, again in designated order, and remove them.
6. Carefully remove the heat sink.
7. Turn the screw in the CPU socket 180 degrees to release the CPU.
Fig. 10 Removing CPU.
8. Take out the CPU (see Fig. 10
).
Optical Disk Drive
To remove the optical disk drive, first remove the battery (see Battery
) and then perform the following
steps:
1. Remove the screw securing the optical disk drive.
Fig. 11 Removing screw securing optical disk drive.