User's Manual

NEC Versa S940/PB EasyNote A7 Disassembly Manual
Page 11
Removing the CPU
To remove the CPU first remove the battery (see Removing the Battery) then perform the
following steps:
1. Losses four screws that retaining the CPU cover as shown in Fig. 10
Fig. 10 Removing the screws retaining CPU cover
2. Remove the CPU Fan screws, disconnect the CPU Fan connector and unscrew screws on
CPU Heat Sink in descending order (3Æ2Æ1) as shown in Fig. 11
Fig. 11 CPU Heat Sink
Note: When install CPU heat sink, screws must be secured in ascending order (1Æ2Æ3).
A = M2.5x5 Black