Submittal Sheet

SPECIFICATIONS
Page ! of !2 2
104-0046B
This product is manufactured under the following patents:
US 9,087,653; US 8,619,395 and other patents pending.
U L R e c o g n i z e d
Component, certified
a s C o m p o n e n t -
A u x i l i a r y D e v i c e s
I n d u s t r i a l C o n t r o l
Equipment for both
Canada and the United
States, per UL 508 and
CSA-C22.2 No 14.
File No:E346457
NOsparc Model
MGXDC1F250
ABSOLUTE MAXIMUM
CURRENT RATING
75A. This absolute maximum current rating also represents the maximum allowable Locked !
Rotor Amperage (LRA) for motor loads and the cold filament inrush current for tungsten loads
ARC SUPPRESSION
Duration: 1 ms (typical)
CIRCUITS (CONTACTS)
One (1) NOsparc per contact (multiple NOsparc units required for multi-contact relays)
CIRCUIT BREAKER / FUSE !
(MAXIMUM)
50A for resistive loads (see Safe Operating Area charts below for more detail)
CLAMPING VOLTAGE
330V (typical at 1 mA)
CONTACT CYCLING
Maximum cycle time: per relay specifications (DO NOT EXCEED relay operating specs)
DIMENSIONS
length: 2.380in (6.045cm) width: 1.070in (2.718cm) height: 0.740in (1.880cm)
ENVIRONMENTAL
operating temperature: -40°C to 85°C (-40°F to 185°F), storage temperature: -50°C to 125°C (-58°F to 257°F),
humidity: 5% to 95% (non-condensing)
INTERFACE WIRES
across contacts: two (2) (W1 / W2 non-polarized)
LEAKAGE CURRENT
0.5mA (nominal)
MOUNTING
orientation: any number of holes: two (2) hole diameter: 0.150in (#6 screw) (3.81mm)
MTBF / RELIABILITY
2.6 million hours (MIL-HDBK-217F)
OPERATING VOLTAGE !
(NOMINAL +/-15%)
12Vdc to 250Vdc
POWER-ON
load current passthrough: 1ms
POWER TYPE
DC (direct current)
TERMINATION
0.250in quick connect male terminals (non-insulated)
TERMINATION MATE
0.250in quick connect female terminals (fully insulated)
WEIGHT
net weight: 1oz (28g)
WIRE GAUGE
wire length between Nosparc and contact terminals: 0in to 24in: #14AWG (minimum)
24in to 36in: #12AWG (minimum)
NOTE: wire lengths over 3 feet are NOT recommended
NOsparc
®
DATA SHEET
MGXDC1F250
PANEL MOUNTING AND CASE DRAWINGS CIRCUIT BREAKER / CIRCUIT FUSE DE-RATING
The chart below depicts the circuit breaker / circuit!
fuse Safe Operating Areas (SOA).
7900 INTERNATIONAL DRIVE, SUITE 300, BLOOMINGTON, MN 55425 // 612-928-5546 // www.ArcSuppressionTechnologies.com
|
Copyright © 1995-2014, Digi-Key Corporation.
All Rights Reserved.
701 Brooks Avenue South,
Keywords:
In stock
Lead free
RoHS Compliant
Product Index
>
Hardware, Fasteners, Accessories
>
Accessories
> 1201578
All prices are in US dollars.
Digi-Key Part Number 277-2296-ND
Price
Break
Unit
Price
Extended
Price
1 1.21000 1.21
10 1.13000 11.30
50 1.03960 51.98
100 0.96050 96.05
250 0.91532 228.83
500 0.85880 429.40
Quantity Available
Digi-Key Stock: 5,386
Can ship immediately
Manufacturer
Phoenix Contact
Manufacturer Part Number
1201578
Description
DINRAIL ADAPTER
UNIVERSAL
Lead Free Status / RoHS
Status
Lead free / RoHS Compliant
Quantity Item Number Customer Reference
Image shown is a representation only.
Exact specifications should be obtained
from the product data sheet.
When requested quantity exceeds displayed pricing table quantities, a lesser unit price may appear on your order.
You may submi t a
request for quotation on quantities which are greater than those displayed in the pricing table.
Datasheets
1201578
Product Photos
1201578
Standard Package
10
Category
Hardware, Fasteners, Accessories
Family
Accessories
Series
CLIPLINE
Hardware Type Adapter
Specifications 10.0mm x 43.0mm x 19.0mm
For Use With/Related Products Din Rail Track
Dynamic Catalog
Clipline Series
Other Names 12 01 57 8
12 01 57 8-ND
1201578-ND
277-2296
USA 10
USA10
21:57:34 7/30/2014
1201578 Phoenix Contact | 277-2296-ND | DigiKey http://www.digikey.com/product-detail/en/1201578/277-2296-ND/290934
1 of 2
07/30/14 9:57 PM
NOTE: DIN rail mounting of one (1), two (2), or three (3) stacked arc suppressors can be
accomplished by adding a single DIN rail mounting adaptor (NOT PROVIDED) (accepting up
to a 1¾ inch #6 screw) to each side of the single arc suppressor or stacked arc suppressors.
DIN Mounting Clips are available from a variety of suppliers. (One example of an appropriate
plastic DIN Rail Mounting Clip is available from Digikey with the part number: 277-2296-ND).