User Guide

Packard Bell EasyNote L Disassembly Manual

Removing the Battery

Perform the following steps to remove the battery:

i. Make sure to power off the EasyNote L.

ii. Disconnect the AC adapter and all peripherals.

iii. Turn the unit over.

iv. Unlock the battery and slide it out.

Fig. 1 Releasing the battery.

Removing the Memory Module

To remove the memory module, first remove the battery (see Removing the Battery

), then perform the

following steps:

1. Remove the screw securing the memory compartment cover.

Fig. 2 Memory compartment cover screw location.

ii. Release with your fingers the side locks located on the memory slot. As you release the

locks, the module will automatically pop up and stay in a 45º angle position.