User Manual

Packet Power™ Ethernet Gateway Version 3 Product Manual

To properly configure the IP address, the Gateway, Netmask and DNS server address must

also be entered. To change these parameters use the same menu navigation style as

described above.

After the DNS Server address is set you will need to reboot to have

implement your changes. Do this by pressing HOLD when “Reboot”

is displayed. “Booting” will show on the display while the unit reboots

and implements your changes.

To leave the configuration menu without having changes take effect, click and HOLD the

“Exit”.

You can find additional information, including details on the SNMP MIB and Modbus register

map, at www.packetpower.com/support.