Operation Manual

6. CHARGE STATUS INDICATOR

The CHARGING and FULLY CHARGED LEDs will illuminate and flash in various

patterns to indicate the different stages of charging. See below for flash patterns.

Note: : SOLID FLASH EXTINGUISH

POWER ON LED: Red LED illuminates (solid) when power on.

CHARGING LED: Yellow LED illuminates and flashes when 7-stage charging

process.

FULLY CHARGED LED: Green LED illuminates (solid) when fully charged.

FAULT LED: When Red LED illuminates and flashes, it may be caused by:

1. Reverse connection between positive and negative of the DC lead.

2. Battery charger output short.

3. Non battery link.

4. 12V charger connects to a battery voltage higher than 17.5V or 24V charger

connects to a battery voltage higher than 35V.

5. Charger's internal temperature is higher than 70 C

6. When Red LED flashes and Yellow LED illuminates (solid) means bulk

charging has timed out and stopped after 24 hours.

: :

Power Off

Power On

Charging

1. Desulphation

2. Soft Start

3. Bulk

4. Absorption

5. Battery Test

6. Recondition

7. Float

Fully Charged

Non Battery Link

Protection

Output Polarity Reverse

Protection

Output Short Protection

Over Voltage Protection

Faulty Battery

Thermal Protection

Red LED

●Power On

Yell LED

●Charging

Green LED

●Fully Charged

Red LED

●Fault

(Bulk Led)