Manualshelf

User's Manual

ManualsBrandsPainless Performance ManualsAutomobile PartsPainless Performance GM LS1 Fuel Injection Wire Harness 60506
11121314151617181920
6.3 ENGINE GROUP INSTALLATION
The engine group is designed to be separated into left side (driver) and right side (passenger) sections. Each
side is tie-wrapped separately, BUT NOT LABELED. The left side of the engine has the connectors for
the idle air control, throttle position sensor, and engine coolant sensor, all of which ARE labeled. When
you begin routing, FIRST separate the engine group into left and right sections and place them accordingly.
10
FIGURE 6.7 Canister Vent Solenoid
FIGURE 6.8 Air Pump Connection
FIGURE 6.10 Fuel Pump Relay Connector
FIGURE 6.9 Air Bleed Solenoid
This is the original location of the canister vent
solenoid in the `98 Camaro.
Fuel Tank
Original location
of the air pump in
the `98 Camaro.
Air Pump
Original location
of the air bleed
solenoid in the `98
Camaro.
Air Bleed
Solenoid
FIGURE 6.5 Air Pump & Air Sol. Relays
FIGURE 6.6 Canister Purge Solenoid
Air Solenoid
Relay
Air Pump
Relay