SDS

Paint Scentsations, LLC., 21021 Heron Way, Suite 106, Lakeville, MN 55044
SAFETY DATA SHEET
Page 3 of 7 #107 Cool Linen Date Issued: 6/3/2015
SECTION 7 - HANDLING & STORAGE
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Spill/Leak Procedures
Small Spills Contain spills immediately with inert materials ( e.g. sand, earth ) . If material
is spilled in a confined area, ventilate the area well. Keep spectators away.
Floor may be slippery; use care to avoid falling. Transfer liquids and solid diking
material to separate suitable containers for recovery or disposal. CAUTION:
keep spills and cleaning runoff out of municipal sewers and open bodies of
water.
Large Spills Use same procedure as small spill.
Containment For large spills, dike far ahead of liquid spill for later disposal. Do no release
into sewers or waterways.
Handling Precautions Store in a cool, dry place. Do not freeze. Spilled material is slippery.
Wash thoroughly after handling.
Storage Requirements Avoid subjecting this product to extreme temperature variations.
Keep product containers tightly closed when not in use.
Engineering Controls: Good general ventilation should be used.
Eye/Face Protection Avoid contact with eyes. Wear chemical goggles. Provide an emergency eye
wash station.
Respiratory Protection Use only with adequate ventilation. For situations where high concentrations of
vapors may be present, use an approved supplied air respirator operated in posi
tive pressure mode.
Protective Clothing/Equipment Wear chemically protective gloves, boots, aprons, and gauntlets to prevent pro-
Fire-Fighting Instructions Do not enter any enclosed or confined fire space without full protective
equipment, including self-contained breathing apparatus ( pressure-demand MSHA/NIOSH ap
proved or equivalent ) to protect against the hazardous effects of combustion products and oxy
gen deficiency.
Fire-Fighting Equipment Because fire may produce toxic thermal decomposition products, wear a self-
contained breathing apparatus ( SCBA ) with a full face piece operated in pressure-demand or
positive-pressure mode.