Safety Instructions

PAJ GPS Finder 01 by PAJ GPS with Online-Tracking V.1.0 EN
© PAJ GPS Inc.
3
1.1 Scope of delivery
Included in the delivery:
PAJ GPS Finder 01 by PAJ GPS
M2M SIM card (is already inserted/ do not
replace)
Cable harness
Velcro fastener with adhesive strip on the back
Note: The latest version of this manual is available
at:
www.paj-gps.com/finder
The PAJ-GPS team wishes you lots of fun with your
PAJ GPS Finder!
1.2 Product graphics
1.3 Startup operations
Please observe the following points before
connecting the device to the vehicle battery:
SIM card is in the PAJ GPS Finder
The PAJ GPS Finder should not be attached to
fuel lines or other combustible components.
No other components of your vehicle should be
damaged by the attachment.
Installing the PAJ GPS Finder on the vehicle to
power the device may discharge the vehicle's
battery. Before connecting, check whether your
vehicle has a discharge protection and retrofit it
if necessary. In idle mode, the finder requires
approx. 10-20 mAh.
Please always observe the manufacturer's
specifications for your vehicle. Compensation
claims due to incorrect connections are hereby
excluded.
1.4 Activation
In order to use PAJ's PAJ GPS Finder, it must first be
activated online.
SIM card slot
LED-signals