Operation Manual

ManualsBrandsPaladin ManualsMiscellaneous179641

DIN-rail-mounting

Back view

Wall mounting

Wiring diagrams

Mounting advice

AUTO

Display of date, day of week, switch

status of channel(s)

Manual overriding possible

(KEY A, B, C, D

)

1..7 Input of switching commands accord-

ing to week day(s) and time (normal

programme)

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

DATE Input permanent ON or OFF, beginning

and ending according to date.

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

? Displays number of free memory

locations

Show switching times for each

channel

Alter switching time

Clear single or all switching times

Use arrow keys to display switching

times  forwards or  backwards.

Use diamond key  to change (alter)

displayed switching time.

Use key CL to cancelling the displayed

switching time.

Use key CL twice to cancelling all switch-

ing times if displayed number of memory

locations available.

Input of actual date and actual time

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

(Automatic display of day of week)

S/W Automatic summer/winter time change

over

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

SP 1..7 Special programme(s):

Input of switching commands accord-

ing to number of special programme,

week day(s) and time.

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

SP DATE Special programme(s):

Programming start and end dates

Use arrow keys to alter flashing digit.

Use diamond key  to increase value.

(Confirming last input by pressing right

arrow  will enter into memory)

Pressing sinked key left side of channel A will clear

real time and microprocessor.

Switching programmes normally will not be affected.

(Check by Read-Out; Mode “?”)

If connected to mains supply display will auto restore

after 2 seconds.

If not connected press diamond key .

Reset

Operating modes

[

]

Selection of programming modes

AUTO  1..7  DATE  ? S/W 

– –– S P –––

1..7  DATE  AUTO…

[CL] Cancelling of inputs in modes

––– SP–––

1..7, DATE, ?, S/W, 1..7 DATE

––– SP–––

[] In modes 1..7, DATE, , S/W, 1..7 DATE:

Change flashing digit resp. position.

In mode ?:

Change selected inputs.

––– SP–––

[] In modes 1..7, DATE, , S/W, 1..7 DATE:

Head for required position (forwards).

In mode ?:

Head for next switching time.

––– SP–––

[] In modes 1..7, DATE, , S/W, 1..7 DATE:

Return to required position (backwards).

In mode ?:

Return to switching time before.

[A] In mode AUTO:

[B] Press for manual overrided ON or OFF in

[C] relevant channel. Holding down key for

[D] 3 seconds, will switch ON or OFF PERM

override. Perm will be displayed.

Programmed function in relevant channel will

be suppressed.

Cancel permanent ON or OFF by holding

down key for a further 3 seconds.

Programming possible also with time switch dis-

connected: Press , display appears, start pro-

gramming.

Make inputs step by step. The appropriate position

in the display is flashing and can be changed by

pressing the key . Head for next position by using

key , go backwards by using key .

Caution: The installation and assembly of electrical

equipment must be carried out only by a skilled

person.

Connect to voltage and frequency according to type

label only.

The high density electronic circuit is protected

against a wide range of external influences. Incor-

rect operation may occur if external influences ex-

ceed certain limits.

Installation details

Programming advice

Key functions

Programming

Programming manual

SC 98

1 ⇒ Monday

2 ⇒ Tuesday

3 ⇒ Wednesday

4 ⇒ Thursday

5 ⇒ Friday

6 ⇒ Saturday

7 ⇒ Sunday

⇒ Channel ON

⇒ Channel OFF

⇒ Impulse

In mode AUTO manual

switching possible by

pressing relevant key.

Picture: SC 98.40

SC 98/M/E/0002

AUTO 1..7 DATE ? S/W 1..7 DATE

– ––– S P ––––

1312

10 11

1312

...

SC 98.10

SC 98.20

SC 98.30

SC 98.40

1312

10 11

1312

...

Summary of content (4 pages)

PAGE 1
Programming manual SC 98 1 ⇒ Monday 2 ⇒ Tuesday 3 ⇒ Wednesday 4 ⇒ Thursday 5 ⇒ Friday 6 ⇒ Saturday 7 ⇒ Sunday -I ⇒ Channel ON -I ⇒ Channel OFF --I I- ⇒ Impulse In mode AUTO manual switching possible by pressing relevant key. Picture: SC 98.40 Programming Key functions Selection of programming modes [ ] AUTO 1..7 DATE ? S/W –––SP––– Menu ı ı 1..7 DATE AUTO… [CL] Cancelling of inputs in modes ı–––SP–––ı 1..7, DATE, ?, S/W, 1..7 DATE [ ] [ ] [ ] [A] [B] [C] [D] ı–––SP–––ı In modes 1..
PAGE 2
Yearly function Mode S/W summertime changes Normal programme In mode “1..7” program as week (no date function) The weekly programmes will run continuosly, week by week, as long as neither special programme nor perm ON or OFF is activated. Special programme(s) Special programmes must be programmed in function “SP 1..7” (as per week programme). Special programmes can be selected (START/STOP Times) in “SP Date” function.
PAGE 3
4x 2x AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE 1x ı––––SP––––ı S/W 1..7 DATE 6x 3x AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE 1x 5x AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE 2x 1x AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE 1x 2x AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE AUTO 1..7 DATE ? ı––––SP––––ı S/W 1..7 DATE AUTO 1..
PAGE 4
Ready to copy Switching programmes Programming according to day(s) of week 1..7 1 ⇒ Monday 2 ⇒ Tuesday 3 ⇒ Wednesday 4 ⇒ Thursday 5 ⇒ Friday 6 ⇒ Saturday 7 ⇒ Sunday Time 1 2 3 4 5 6 7 -I ⇒ Channel ON -I ⇒ Channel OFF --I I- ⇒ Impulse A B C D Impulse time Programming according to day(s) of week SP 1..