User Manual

Page 52 Managing Your Applications
To change the password, enter the new password, and tap OK.
To delete the password, tap Delete.
Locking your handheld
You can also lock your handheld so that you need to enter your
password to operate it.
Important: If you lock your handheld, you must enter the exact
password to re-activate your handheld. If you forget the
password, you need to perform a hard reset to resume
using your handheld. Performing a hard reset deletes all
the records in your handheld; however, you can restore
all synchronized data at the next HotSync operation. See
“Performing a hard reset” in Appendix A for information
about how to perform a hard reset.
To lock your handheld with a password:
1. Perform a HotSync operation to synchronize the data between
your handheld and your computer. See “Exchanging and updating
data: HotSync operations” in Chapter 4 for information on
synchronizing your data.
2. Assign a password.
3. Tap Lock & Turn Off.
4. Tap Off & Lock.
5. To start your handheld, turn it on and then enter the password.
Tap Lock &
Turn Off