User's Manual

176 Section 3F: Using Bluetooth® Wireless Technology and Dial-Up Networking
Requesting a Connection With Another Bluetooth Device
1. Go to Applications and select Bluetooth .
2. If you have not already done so, enter the basic
Bluetooth settings as described in “Entering
Basic Bluetooth Settings” on page 174.
3. Select Setup Devices.
4. Select Trusted Devices.
5. Select Add Device. The Discovery icon appears,
indicating that the discovery process is active.
6. Select the Show pick list and select Nearby devices.
7. If the device you want to add doesn’t appear in the discovery results list,
make sure that the other device is ready to receive a connection request (see
the device’s documentation), and then select Find More on your Treo device
to search again.
8. Enter the same passkey on your Treo device and on the Bluetooth device,
and then select OK.
9. Select Done.
Important:
Some Bluetooth devices, such as headsets and GPS receivers, may have a
built-in passkey; other devices may provide a screen where you enter the
passkey. We recommend that you use a passkey of 16 digits, where
possible, to improve the security of your Treo device. The longer the
passkey, the more difficult it is for the passkey to be deciphered. If the
Bluetooth device has a built-in passkey, see the device’s documentation
for the passkey.
FINAL DRAFT Palm, Inc. Confidential