User's Manual

274 Section 6A: Managing Files and Applications
On a Windows computer:
1. On your computer, click the HotSync manager icon
in the taskbar in the lower-right corner of your
screen. Make sure that Infrared is selected.
2. On your device, go to Applications and select
HotSync .
3. Select Local.
4. Select the pick list below the HotSync icon and
select IR to a PC/Handheld.
5. Position the IR port of your device within a few inches of the IR port of your
computer.
6. Select the HotSync icon on your device.
When synchronization is complete, a message appears at the top of your device
screen. Be patient; synchronization may take a few minutes.
On a Mac computer:
1. Double-click the HotSync manager icon in the Palm folder.
2. From the HotSync Controls tab, select Enabled.
3. Click the Connection Settings tab, and then check the On box next to IR port.
4. Close the HotSync Software Setup screen.
5. On your device, go to Applications and select HotSync .
6. Select Local.
FINAL DRAFT Palm, Inc. Confidential