Instruction Manual Part 15

Appendix B Frequently Asked Questions
214
Beaming Problems
Recharging Problems
I cannot beam data to another Palm
OS handheld.
■ Confirm that your handheld and the other Palm OS
handheld are between ten centimeters (approximately 4")
and one meter (approximately 39") apart, and that the path
between the two handhelds is clear of obstacles. Beaming
distance to other Palm OS handhelds may be different.
■
Move your handheld closer to the receiving handheld.
When someone beams data to my
handheld, I get a message telling me
it is out of memory.
■ Your handheld requires at least twice the amount of
memory available as the data you are receiving. For
example, if you are receiving a 30K application, you must
have at least 60K free.
■
Perform a soft reset. See “Performing a soft reset”
in Appendix
A
for more information.
When I place my handheld in the
cradle, the indicator light does not
go on.
■ Confirm that your handheld is well seated in the cradle.
■ Confirm that your recharger cable is properly connected to
the back of the cradle’s USB or serial port connector that
plugs into your computer.
■ Confirm that your recharger is plugged into an AC outlet
that has power.
■ If you have not used your handheld for a long period, such
as an extended vacation, the battery may not contain
enough charge to power the indicator light. After your
handheld has recharged, the indicator light will function
normally.