Handbook

Chapter 5 Page 57
Note: If you have Network HotSync software installed on your
Palm III organizer, the Remote Setup dialog appears
instead. See “Network Preferences” for more
information.
4. Enter the telephone number to access the modem connected to
your computer.
5. If needed, enter a dial prefix (such as “9”) to access an outside line,
and then tap the Dial Prefix check box.
Tip: You can enter a comma in the field to introduce a “pause”
in the dialing sequence.
6. If the phone line you’re using for the Palm III organizer has “Call
Waiting,” select the Disable call waiting check box to avoid an
interruption during the modem HotSync operation.
7. If you want to use a calling card to place the call, select the check
box and enter the calling card number.
8. Tap OK to return to the HotSync dialog.
9. Tap the icon to open the HotSync menus.
10. Tap Modem Setup from the Options menu to display the Modem
Preferences screen.
11. Enter the Modem Preference settings as described in “Modem
Preferences.”
Selecting the Conduits for a Modem HotSync Operation
The Conduit Setup dialog on your Palm III organizer enables you to
define which files and/or applications synchronize during a modem
HotSync operation. You can use these settings to minimize the time
required to synchronize data with a modem.
To change the Conduit Setup for a modem HotSync operation:
1. Tap the icon in the Graffiti area to display the Applications
Launcher.
2. Tap the icon to display the HotSync screen.
3. Tap the icon to open the HotSync menus.
4. Tap Conduit Setup from the Options menu to open the Conduit
Setup dialog.
apps.bk : apps.fm5 Page 57 Thursday, June 4, 1998 12:54 PM