User's Guide
Table Of Contents
- Contents
- Getting Up and Running
- Charging the Battery
- Using the Keyboard
- Adjusting the Screen Display
- Using Your Phone
- Date Book Plus
- Blazer Web Browser
- SMS Messages
- Preferences and Other Settings
- Synchronizing Data with Your Computer
- Beaming Information
- Resetting Your Handheld
- Using the Electronic User Guide
- Troubleshooting
- FCC Statement
Charging the Battery 5
Charging the Battery
Your handheld battery provides approximately 2 hours of talk time or 72
hours of standby time. If the battery drains to the reserve level, you can still
use your handheld applications for about 1 day, but there is not enough
power to use the phone and other wireless features.
It takes approximately 1 hour to charge a fully drained battery. To charge
the battery do one of the following:
■ When you’re near your computer, connect your handheld to the
HotSync
®
cable with the AC adapter connected to a wall outlet as
shown on page 27.
■ When travelling, connect the AC adapter cable directly to your
handheld as shown here.
Tip: The LED is solid red while your handheld charges. When the LED
turns green, your handheld is charged. If the LED does not turn on,
make sure the AC adapter cable is connected to a wall outlet.
LED