Handbook

Chapter 11: Installing Applications page 143
Serial port
Note: If you are unsure about the exact location of the serial port
on the desktop computer, refer to the user’s manual supplied with
the computer.
2. Launch PalmPilot Desktop.
3. From the HotSync menu, choose Setup. When the Setup
dialog appears, click the Local tab to display the settings:
4. Check the selected Serial Port and make sure it corresponds
to the port number that is connected to the PalmPilot Cradle.
Note: This port must not be shared with an internal modem or
other device. If you have trouble determining the correct
serial port, refer to the section entitled “Troubleshooting” that
appears in Chapter 12: Reference.
5. Choose a Speed. The default is As Fast As Possible, which will
allow the PalmPilot Desktop and PalmPilot to find and use the
fastest speed. We suggest you initially try the As Fast As
Possible rate, and adjust downward if you experience
problems.
6. Click OK to close the Setup dialog and activate your settings.