User manual

Table Of Contents
SETTING UP
INSTALLING THE BATTERY
7
1
CHAPTER
Installing the battery
1 Use one hand to press the battery
door release and use the other hand to
slide the battery door downward to
remove it from your smartphone.
2 Align the battery contacts with the
phone contacts inside the battery
compartment.
3 Insert the battery into the
compartment at a 45-degree angle and
then press it into place.
4 Slide the battery door onto the back of
the smartphone until it clicks into place.
Your smartphone screen turns on and
the Treo screen appears. Wait for the
progress bar on the Treo screen to fill
and the Windows Mobile
®
screen to
appear.
5 Follow the onscreen instructions to
finish the installation.
Battery door
release
TIP
If your smartphone does not turn on after
you insert the battery, you need to connect it
to the AC charger to charge it. If it still doesn’t
start, do a soft reset. See P
erforming a soft
reset.
TIP
You can buy an extra battery as a spare for
long plane trips or periods of heavy data use.
Be sure to use batteries from Palm only.
Reset button
Phone
contacts
Battery
contacts