User manual

YOUR PERSONAL SETTINGS
USING AUTO-KEYGUARD AND TOUCHSCREEN LOCKOUT
202
10
CHAPTER
Auto-lock: Sets whether your
smartphone locks automatically and
when this occurs.
Change Lock Code: Lets you assign or
change the lock code used to unlock
your smartphone. Your default lock code
is the last four digits of your mobile
phone number. If you change the lock
code, select OK to accept your new
code.
4 Press OK to finish.
Using system password lock
To protect your personal information, you
can lock the system so that you need to
enter your password to access any of your
information or use other features of
your smartphone.
IMPORTANT If you lock your system, you
must enter the exact password to unlock it.
If you enter an incorrect password, you are
given another chance. Each time an
incorrect password is entered, you are
given progressively longer time periods
between your chances to enter the
password. If you forget the password, you
need to perform a hard reset to resume
using your smartphone. Performing a hard
reset deletes all the entries in your
smartphone. However, you can restore all
previously synchronized info the next time
you sync (see Synchronizing information
).
1 Press Start and select Settings.
2 On the Personal tab, select Lock .
3 On the Password tab, check the
Prompt if device unused for box to
turn on the password feature.
TIP When Phone Lock is on, you can unlock
your smartphone by going to the Today
screen, entering your lock code, and then
selecting Enter. You do not need to enter your
password to answer a call.