User manual

YOUR PHONE
WHAT CAN I DO DURING A CALL?
44
3
CHAPTER
Using Flash mode during an Active call
Flash mode is an alternate way to manually
manage your calls while one or more calls
are active. The preferred methods for
managing multiple calls are described in
M
aking a second call, Answering a second
call (call waiting), and Making a conference
call. But when these methods don’t work,
you can use Flash mode. This mode is
often used during a conference call when
one of the calls has ended but the other
remains connected.
1 Press Phone/Send from the Active
Call screen.
2 Select Send Key (Flash).
3 Press Flash (left action key).
Depending on the state of your active
call, pressing Flash does one of the
following:
• If you have one active call, pressing
Flash (left action key) puts the
call on hold. To take the call off hold,
press Flash (left action key)
again.
• If you have two active calls and at
least one of the calls is an incoming
call, pressing Flash (left action
key) swaps between the two calls.
• If you have two active calls and both
of the calls are outgoing, pressing
Flash (left action key)
conferences the two calls.
• If you have two calls in conference,
pressing Flash (left action key)
hangs up the second call. You can
then dial another number.
4 Press Power/End to exit Flash
mode and end all calls.
DID YOU KNOW ? When the second call is
outgoing, you can conference the two calls,
but you cannot swap between them.
When the second call is incoming, you can
swap between the two calls, but you cannot
conference them.
TIP When two calls are active and you press
Power/End, you hang up both calls. To return
to the first call, wait for the person on the
second call to hang up.