User manual

SYNCHRONIZING INFORMATION
SETTING UP WIRELESS SYNCHRONIZATION
72
4
CHAPTER
1 Press Start and select Programs.
2 Select ActiveSync .
3 Press Menu (right action key) and
select Add Server Source.
4 Enter the server address, and then
press Next (right action key).
5 Enter the username and password you
use to access your corporate mail
server, and enter the Exchange Server
domain. Check the box if your server
uses an encrypted connection.
You can’t see your password as you
enter it, so be careful. Be sure Caps
Lock and Option Lock are not on unless
you need them. For info on how to enter
characters, see Entering lowercase and
uppercase letters and Entering
numbers, punctuation, and symbols.
6 Check the Save password box.
TIP If you installed ActiveSync desktop
software, you may have already set up your
smartphone to synchronize wirelessly with
the server. To check, press Start, select
Programs, and select ActiveSync. Press
Menu (right action key). If Configure Server
appears instead of Add Server Source,
wireless synchronization is already set up, and
you can skip this procedure.
TIP The Exchange Server settings are case-
sensitive. Be sure to enter uppercase and
lowercase letters properly.