User manual

YOUR APPLICATION AND INFO MANAGEMENT TOOLS
BEAMING INFORMATION
188
9
CHAPTER
turn this option off. After you’re done
using this setting, remember to change
it back to Hidden.
Te m p o r a r y : Enables Bluetooth devices
that are not on your Trusted Device list
to request a connection with your
smartphone during the next two
minutes. Your smartphone reverts to
the Hidden setting and becomes
inaccessible to other devices after two
minutes.
4 Use the other device to discover your
smartphone and send information to it:
• See the other device’s documentation
to learn how to discover and send
information over a Bluetooth wireless
connection.
• If the Ringer switch is set to Sound
On your smartphone beeps to
notify you of the connection, and then
prompts you to accept the info. Select
a category or expansion card to
specify where you want to store the
item. If you don't select a category,
the item goes into the Unfiled
category.
5 Select Ye s to receive the information or
No to refuse it.
Beaming information
Your Treo 755P smartphone is equipped
with an IR (infrared) port so that you can
beam information to another Palm OS
®
device with an IR port. The IR port is
located on the side of your smartphone,
above the expansion card slot door, behind
the small dark shield.
TIP The Device Name in the Bluetooth app is
the name other devices with Bluetooth
wireless technology see when they connect
to your smartphone. The default name is the
name you gave your device during setup. You
can change this name if you want to.
DID YOU KNOW ? When you receive an
application over a Bluetooth connection, you
can store the application on your smartphone
or send it to an expansion card inserted into
the expansion card slot.