EN Operating Instructions & Parts Manual 6” Rotary Table Model 9634116 9643338.
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. PLEASE REFER TO BACK COVER FOR INFORMATION REGARDING PALMGREN’S WARRANTY AND OTHER IMPORTANT INFORMATION. Model #: ____________________ Serial #: ____________________ Purch.
Model 9634116 - 6” Rotary Table optional parts Save this manual The following parts add functionality and are available, but not included with your Rotary Table. They may be ordered from your Palmgren distributor. See page 7. UNPACKING Inspect: • All tools should be visually inspected before use, in addition to regular periodic maintenance inspections. • See General Safety Instructions, Cautions and Warnings as shown. Never use highly volatile solvents.
GETTING STARTED SAFETY / SPECIFICATIONS ASSEMBLY / INSTALLATION OPERATION TROUBLESHOOTING MAINTENANCE / REPAIR SAFETY RULES For your own safety, read all of the instructions and precautions before operating tool. Always wear safety goggles complying with United States ANSI Z87.1. before commencing milling or drilling operation. PROPOSITION 65 WARNING: Some dust created by using power tools contain chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.
8. Read the degrees and minutes from the micro collar and use the vernier collar scale to read to ten seconds. Optional dividing plate accessory The dividing plate accessory is used to divide one 360° table rotation into 2-66 and all divisible by 2, 3, and 5 from 67-132 equal divisions. The gear ratio of the rotary table is 1:90 so 90 rotations of the handwheel rotate table one full rotation.
T H N 1 ASSEMBLY / INSTALLATION T H N T H N T 22 B-33 4 3/33 43 C-43 2 4/43 64 2 45 23 B-23 3 21/23 44 3 30 24 A-20 3 15/20 45 22 10/20 25 A-20 3 12/20 46 5 18 26 C-39 3 18/39 6 15 27 A-18 3 6/18 4 SAFETY / SPECIFICATIONS GETTING STARTED INDEX TABLE - MODEL 9834116 – 6” ROTARY TABLE A-20 7 B-21 12 18/21 28 8 A-20 B-29 T H N T H N 82 C - 41 1 4/41 100 A-20 18/20 65 C-39 1 15/39 83 66 B-33 1 12/33 84 B-23 1 22/23 67 47 C-47 1 4
GETTING STARTED SAFETY / SPECIFICATIONS ASSEMBLY / INSTALLATION REPAIR PARTS LIST FOR 9634116 – 6” ROTARY TABLE 1 2 3 4 5 6 7 8 9 10 11 12 13 Base Body Table Taper Sleeve Table Nut Worm Wheel Worm Shaft Nut Eccentric Sleeve Sleeve Ring Sleeve Set Screw Handle Vernier Ring Micro-collar Part No. 9643319.01 9643320.01 9643321.01 9643322.01 9643323.01 9643324.01 * 9643325.01 9643326.01 9643327.01 9643328.01 9643329.01 9643330.01 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 Ref. No.
PALMGREN WARRANTY C.H. Hanson / Palmgren warrants their products to be free of defects in material or workmanship. This warranty does not cover defects due directly or indirectly to misuse, abuse, normal wear and tear, failure to properly maintain the product, heated, ground or otherwise altered, or used for a purpose other than that for which it was intended. The warranty does not cover expendable and/or wear part (i.e.