Warranty

4.1.2 Control panel
Img.4-2: Operating elements on the control panel
4.2 Safety
Commission the machine only under the following conditions:
 The machine is in proper working order.
 The machine is used as prescribed.
 The operating instructions are observed.
 All safety devices are installed and activated.
All failures should be eliminated immediately. Stop the machine immediately in the event of any
anomaly in operation and make sure it cannot be started up accidentally or without authoriza-
tion.
Notify the person responsible immediately of any modification.
 "Safety during operation“ on page 50
Selector switch rotational direction
Operation mode for selection of right-handed or left-handed rotation.
Push button ON
The push button "ON"
switches on the rotation of the drilling spindle in preselected operating
mode.
Push button OFF
The "push button OFF“
switches the rotation of the drilling spindle off.
Quill lever
Manual quill feed and for engaging the automatic quill feed.
Machine illumination ON / OFF
Switches the backlight on or off.
Master switch
Interrupts or connects the power supply.
Machine illumination ON / OFF
Selector switch rotational
direction
Left hand motion/ clockwise
rotation
Push button "OFF"
Fuses, fine-wire fuses
Emergency-stop
pushbutton
Push button "ON"
Clamping lever
Drill depth stop
23