Installation Guide

9
Please read these
instructions carefully before you start to
assemble this product.
Please carry out the steps
in the order set out in these instructions.
Keep these instructions in
a safe place for future reference.
When encountering the
information icon, please refer to the relevant
assembly step for
additional comments and assistance.
,-re and Safety
Advice
Please follow the instructions
as listed in this manual.
Sort the parts and check the list
of contents.
For safety purposes we
strongly recommend the product to be assembled
by at least two people.
Some parts may have sharp
edges. Please be careful when handling components.
Always wear gloves, eye
protection, and long sleeves when assembling or
performing any maintenance
on your product.
Do not attempt to assemble
the product in windy or wet conditions.
Dispose of all plastic bags
safely - keep them out of reach of small children.
Keep children away from the
assembly area.
Do not attempt to assemble
the product if you are tired, have taken drugs,
medications or alcohol, or if
you are prone to dizzy spells.
When using a stepladder or
power tools, make sure you follow the
manufacturer's safety advice.
Do not climb or stand on the
roof.
Heavy articles should not be
leaned against the poles.
Do not hang or lay on the
profiles.
Keep roof and gutter clear of
snow, dirt & leaves.
Heavy snow load on roof can
damage the product making it unsafe to stand
below or nearby.
This product was designed and
produced to be used as a Patio cover only.
Some versions of this product are
painted.
If color was scratched during
assembly it can be fixed with the following tints:
White - RAL 9016 Grey - RAL
7012
Cleaning Instructions
When your product needs cleaning, use a mild
detergent solution and rinse
with cold clean water.
Do not use acetone, abrasive cleaners, or others special
detergents to clean
the panels.
Before Assembly
This product must be assembled on a solid base
(such as concrete or asphalt) and
anchored to the ground.
Choose your site carefully before beginning
assembly.
Sort the parts and check according to the contents
parts list.
Site surface needs to be leveled (mainly below the
poles).
Please consult your local authorities if any permits
are required prior to constructing
the product.
Prior to enlarging the Patio Cover, several parts need
to be dismantled, it is
recommended to keep them in a safe place for future
use.
Note: Use only the parts registered in the content list,
some parts may be surplus.
Tools & Equipment
T001 (Supplied)