OWNER'S MANUAL 51CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 5159G Type Tested Electrical Safety AS/NZS 3250 Lic 4164 Standards Australia APP No: N15959 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA:1300 657 888
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features ...................................................
INTRODUCTION Features . . . . . . . . . . . . .
NOTES FOR OPERATION * Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set.
Installation Antenna Connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.
Appearance Front view Note: Functions of , MENU, TV/AV, VOL remote controller.
Appearance Remote Controller 5
OPERATION Turning the Power On/Off & Menu Operation . The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. 2. If no picture appears on the screen, press the button on the set or on the remote controller to turn the set on and the yellow indicator light up.
OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To preset channels (ASM) Use the ASM (Automatic Search Memory) function to preset all the active channels in your local area automatically. To enter into the PRESET menu Press the PRESET button to display PRESET the menu on the screen.
OPERATION Tuning in (continued) Use the SEARCH function if desired channels can not be preset with the ASM or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using SEARCH and SKIP functions. To preset channels (SEARCH) SEARCH If ASM can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of SEARCH. 1. 2.
OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected with POS+/- button. 1. Enter into the PRESET menu, press the POS+/button to select POS., then select the unwanted program number withthe VOL+/- button. 2. Press the POS+/- button to select "SKIP". Press the VOL+/- button to select "SKIP ON".
OPERATION Tuning in (continued) AFT (Automatic Frequency Tuning) If picture and sound’s effect of the channel is instead poor by making use of FINE, you can correct them by making use of AFT. Enter into the PRESET menu, press POS+/- button to select AFT, press VOL+/- button to select AFT ON. Note: If the program is in AFT ON, the position number displayed on the screen will be in green. PRESET POS SKIP BAND FINE AFT SEARCH ASM S-RCV 22 OFF UHF OFF OFF The setting of colour and sound system 1. 2.
OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons (0~9) and --/---button To select a one-digit position number (0-9) Press the 0~9 button directly. 9 AUTO B/G To select a two-digitposition number (10~99) Press --/--- button to display -- on the screen, then press the channel number.
OPERATION Convenient Picture and Sound Controls Selectable picture To select the picture mode You can select the picture quality instantly among four preset modes and one user-set mode. Press the P.M button to select the desired picture quality. SOFT STANDARD VIVID LIGHT PERSONAL SOFT, STANDARD , VIVID , LIGHT and PERSONAL (user-set) can be selected cyclically. To set the desired picture quality to the MEMORY position 1.
OPERATION CLOCK SETTING CLOCK menu Press the CLOCK button to display the CLOCK menu. (Or press the MENU button repeatedly to select and highlight CLOCK icon, and press VOL+/- button to enter into the CLOCK menu.) CLOCK TIME --:-OFF-TIME --:-ON-TIME --:-POS - TIME setting Making use of this function can set the current time for the TV. Press the POS+/- button to select and highlight TIME. Press the VOL- button to set the hour (0~23). Press the VOL+ button to set the minute (00~59).
OPERATION System setting SYSTEM menu Press the MENU button repeatly to select and highlight the SYSTEM icon. Press the VOL+ button to enter into the menu of SYSTEM. SYSTEM To select the language for the OSD (on-screen display) SYSTEM CHINESE ENGLISH B/B V.ZOOM C-SYS S-SYS Making use of this function can switch the language for the OSD to either English or Chinese.
OPERATION Playing Games In this TV set there are two built-in games: Falling Cube and Millennium Alien. Below we will describe how to make use of them. To enter into Game Press MENU button to select and highlight GAME icon. Press VOL+/- button to enter into GAME SELECT menu. GAME To select Game In GAME SELECT menu, press POS+/- button to select one of the games, press VOL+/- button to enter into the game. GAME SELECT FALLING CUBE MILLENNIUM ALIEN Making use of FALLING CUBE Enter into FALLING CUBE.
OPERATION Playing Games (continued) & SLEEP Timer Making use of MILLENNIUMALIEN Enter into MILLENNIUM ALIEN, there are characters "SHOOTING START" flying from right to left. When the characters have flied over, you can begin to shoot. Pressing VOL+ button can move the battleplane on the lower screen rightward, pressing VOL- button can move the battleplane leftward, pressing POS+/- button can shoot the bullet out. When shooting, you should pay attention not to be hurt by opponent’s bullet.
OPERATION Other functions CALENDAR function(1800-2299) Press MENU button repeatedly to select and highlight CALENDAR icon, press VOL+/- button to enter into calendar interface. Pressing the POS+/- button can check years' calander forward or backward. Pressing the VOL+/- button can check months calendar of some year forward or backward. To exit the calendar interface, press RECALL button.
OPERATION Other functions (continued) CHANNEL SWAP Making use of CHANNEL SWAP you can reorder the programs in your favorite order. Press the MENU button repeatedly to select and highlight SWAP icon. Press VOL +/- button to enter into CHANNEL SWAP menu. Press POS +/- button to select "POSITION A: -" item, then input the desired channel number which you want to swap by pressing "0-9" or "--/---" button.
CONNECTING OTHER EQUIPMENT External Equipment Connections This set is incorporated with Audio & Video input and output terminals which allow direct connection to external equipments (such as VCR, Video DISC, VCD, Satellite Receiver etc.) for playing back and recording the programs. Refer to the owner’s manual of the equipment to be connected as well. Video playback The figure below shows how to connect the TV set to the video equipment.
OTHERS Troubleshooting Guide . Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Check for the following items Symptoms No power, red indicator is not lit up Poor colour, poor tint Spots appear on the screen Stripes appear on the screen . . . . . .
OTHERS Specifications Power supply: Power consumption: Dimensions(mm): Weight(kg): CRT TV system & channel range System VHF PAL-B/G 2-12 AC 240V, 50Hz < 70W 590(W) x 448(H) x 468(D) 23 51cm Colour system: Sound output: Accessory: PAL-BG, NTSC (AV) 2.5W One remote controller UHF 21-69 * Note: Design and specifications are subject to change without notice.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 604-F2173-02