OWNER'S MANUAL PURE FLAT AV STEREO TELEVISION 68CM CORDLESS REMOTE COLOUR TELEVISION MODEL: 6820PF Type Tested Electrical Safety AS/NZS 3250 Lic 4166 Standards Australia APP No: N15899 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.
Congratulations on your purchase of this Palsonic colour television receiver. We recommend that you thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this receiver. Retain this manual in an easily accessible location for future reference. * Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents INTRODUCTION Features ...................................................
INTRODUCTION Features . . . . . . . . . . . . . .
NOTES FOR OPERATION * Do not let the TV set be in stand-by condition for a long period of time. When it is not in use, please turn off the power supply and remove the power plug. When it is to be left unattended for a prolonged period of time, it is recommended to disconnect the connection to the outdoor aerial, to avoid thunder strike. * Please follow cautions for safety in the TV set instructions, and all warnings and descriptions denoted on the TV set.
Installation Antenna Connection To ensure a bright-coloured and clear picture, you should use an outdoor aerial or CATV cable. If the signals are strong enough, you may use an indoor aerial. Note: In case of using the Twin-lead aerial feeder (300 ) for UHF/VHF aerial, use a 300-75 ohm adaptor (not supplied) When using the coaxial cable (not supplied) (75 ) for UHF/VHF aerial, connect the plug into the 75 ohm aerial socket directly.
Appearance Front view Note: Functions of MENU, TV/AV, VOLUME+/-, CH remote controller.
Appearance Remote Controller 5
Menu Introduction Introducing the menu You can use the on-screen menus to set the picture quality and other settings. You can use buttons on both the remote controller and the TV to operate the menus. Notes: To select each item, use the button. Normal Screen or To adjust or set each item, use the or button Press MENU button 76 75 100 50 COLOR BRIGHT CONT SHARP SELECT: SET: Press MENU button 008 POSITION VHFL BAND OFF SKIP SEARCH MFT AUTO MEMORY Press MENU button ENG/ AUTO BG ON LANGUAGE C.SYSTEM S.
OPERATION Turning the Power On/Off . The following describes how to turn the TV on/off using the TV's main switch and the remote controller. To turn the power on/off 1. Press the POWER switch, the red power indicator lights up. 2. Press the button or any one of 0~9 number buttons on the remote controller to turn the set on and the green indicator lights up. Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV.
OPERATION Tuning in There are two ways to preset channels: to preset channels automatically and to preset channels manually. Below we will describe how to preset the channels by making use of the menu. To preset channels (Auto search) Use the AUTO SEARCH function to preset all the active channels in your local area automatically. To enter into menu Press the MENU button repeatedly to select and highlight the icon, and the PRESET menu appears on the screen automatically.
OPERATION Tuning in (continued) Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.
OPERATION Tuning in (continued) To skip unnecessary position numbers and MFT (Manual Fine Tuning) To skip a position number After presetting the channel you can skip unnecessary position numbers so that only the channels you want to watch are selected. 1. Enter into the (PRESET) menu, press the or button to select POSITION , then select the unwanted program number with the or button.
OPERATION Tuning in (continued) The setting of colour system Note: In factory the TV set's colour system has been preset to AUTO, if you want to change the system, please do the following adjustments. 1. Press the SYS button, the colour and sound system will be displayed on the screen. [SYSTEM] AUTO BG COLOR SOUND SELECT 2. If the colour is abnormal, press the or button to select COLOR, then press the or button to select the proper colour system.
OPERATION Channel selection You can watch TV programmes being broadcast on the preset channels. To watch a TV programme You can select your desired TV program by one of the following methods. Using the direct select buttons To select a one-digit position number (0~9) METHOD 1: Press the button and the screen displays "X- -", wait for 2 seconds and the channel is selected. METHOD 2: Press 0 button and the screen displays "0- -", then press 0 button again, the screen displays "00-" then press the numbers.
OPERATION Convenient Picture Controls Selectable picture To select the picture mode You can select the picture quality instantly among three preset modes and one user-set mode. Press the P.S button to select the desired picture quality. BRILLIANT, NATURAL, MELLOW and PERSONAL (user-set) can be selected cyclically. BRILLIANT NATURAL MELLOW PERSONAL To set the desired picture quality to the PRESONAL position Press the MENU button to display the 1. (PICTURE) menu. Or press the P.
OPERATION Convenient Sound Controls and Sleep timer Adjusting the volume and muting the sound To adjust the volume Adjust the volume with the VOL buttons. Press the VOL button to decrease the sound. Press the VOL button to increase the sound. To mute the sound The muting function is convenient when you need to pay attention to surrounding sounds, answer a phone call, receive a visitor, etc. 1. Press the MUTE button to mute the sound. MUTE 2.
OPERATION System setting SYSTEM SET Press the MENU button repeatedly to select and highlight the icon, and the SYSTEM SET menu appears on the screen automatically. LANGUAGE C.SYSTEM S.SYSTEM B.B.SET SELECT To select the language for the OSD Making use of this function can switch the language for the OSD to either English or Chinese. In the (SYSTEM SET) menu, press the or button to select LANGUAGE. Press the or button to select ENGLISH or " " (CHINESE).
OPERATION Special functions CALENDAR function(1800-2200) Enter into the (SPECIAL FUNCTION) menu, press the or button to select CALENDAR, press the or button to enter into calendar interface. In the calendar interface pressing the or button can switch among the year, month and the date while pressing the or button can increment or decrement them.
OPERATION Special functions Playing games To play GAME2 (Falling Cube) Enter into the (SPECIAL FUNCTION) menu, press the or button to select GAME2 item, press the or button to enter GAME2 interface. CALENDAR GAME1 GAME2 SELECT ADJUST Press any one of , , , buttons to start the game. on the screen, there are falling cubes, pressing button can change the cubes shape, pressing , buttons can move the cubes leftward or rightward while pressing button can quicken the falling speed.
OPERATION CLOCK SETTING CLOCK SET Press the MENU button repeatedly to select and highlight the appears on the screen automatically. icon, and the CLOCK SET menu NOW TIME setting Making use of this function can set the current time for the TV. In the (CLOCK SET) menu, press the or button to select NOW TIME.
OPERATION Channel reservation To reserve the channel Making use of this function can switch the channel to your desired channel you reserve at a preset time. Press the MENU button repeatedly to select and highlight the icon, and the RESERVE menu appears on the screen automatically TIME OFF CHANNEL -- SELECT SET Time setting Making use of this function to set the time to switch the channel to the reserved channel. Press the or button to select TIME. Press the or button to set the time.
CONNECTING OTHER EQUIPMENT External Equipment Connections . The following describes how to use and connect the TV with other AV equipment. Refer to the owner’s manual of the equipment to be connected as well. To connect AV input terminal You can connect video equipments such as a VTR and video camera to this TV and enjoy the high quality picture and sound. If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal (special S-VIDEO type) of the unit.
CONNECTING OTHER EQUIPMENT To connect AV input terminal (continued) To select the video input, press TV/AV the button on the TV set or AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays program number, or press channel select button or the CH button. TV VIDEO 1 VIDEO 2 VIDEO 3 (S-VIDEO) If the colour of video input is abnormal, the colour system setting may be incorrect.
OTHERS Troubleshooting Guide . Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing. Check the following items Symptoms . . . . No power, red indicator is not lit up Poor colour, poor tint Spots appear on the screen Stripes appear on the screen Be sure the power cord is plugged in. Contrast, colour, tint are not correctly adjusted Possible interferences of automobiles, motorcycle, trolley bus, neon lamps, etc.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL:(02)9313 7111 FAX:(02)9313 7555 www.palsonic.com.
