DVD/CD/MP3 PLAYER DVD2060DX USER'S MANUAL Please read this manual before connection and use. PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
BEFORE USE The lightning flash with arrow head symbol, within an equilateral triangle,is intended to alert the user to the presence of uninsulated [dangerous voltage] within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
BEFORE USE CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is transistorised and does not contain any parts that can be repaired by the user.
BEFORE USE NOTES ON HANDLING ON HANDLING DISCS The top and rear panels of the unit may become warm after a long period of use. This is not a malfunction. When the unit is not use, be sure to remove the disc and turn off the power. If you do not use the unit for a long period, the unit may not function properly in the future. Turn on and use the unit occasionally. Do not place foreign objects on the tray. Do not touch the play back side of the disc. Do not attach paper or tape to disc.
TABLE OF CONTENTS TABLE OF CONTENTS BEFORE USE REFERENCE 17 Safety Precautions ----------------------------------------- 1 System Setup ----------------------------------------------- Important Safety Instructions ---------------------------- 2 Trouble Shooting -------------------------------------------- 21 Notice --------------------------------------------------------- 3 Symptoms and Corrections ----------------------------- 22 DISC Protection -------------------------------------------- 3 Syst
BEFORE USE BEFORE USE SETTING THE TV SCREEN Multi-aspect ratio suit to different TV screen size. TV screen Film format 4:3 Normal 16:9 Full view Mailbox Widescreen 4:3 16:9 FUNCTIONS SUPPORTED BY DVD PLAYER There are many functions available on DVD discs and the functions vary per player and per manufacturer.
BASIC PLAYBACK Preparations If you want to view a disc, turn on the TV and select the video input, and connect to the DVD player. Basic Playback 1. Press POWER switch on the front panel to turn on, and the TV screen will display log. The LED will display NO DISC if the DVD player has no disc in the tray. If a disc is already in the tray, it will begin to play the disc. 2. Press OPEN / CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes.
Advanced Playback Remote Control Operation IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLAY ON SCREEN WILL BE DIFFERENT. POWER During playback, press POWER to stop the player and return to standby mode. While the player is in standby, press POWER or any key on the front panel to resume normal operation. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE.
Advanced Playback DISPLAY During playback, press DISPLAY to display the current time counter position. DVD 00:00:01 0:04:45 Elapsed time of the current track/chapter. Press DISPLAY again to display additional information about the playing disc. CD Disc type VCD CDDA 00:00:01 0:04:45 Elapsed time of the current track. Total tracks. Track 1/15 Current track.
Advanced Playback SEARCH During playback, press SEARCH, and the [Tack Search] menu will display as follows: CD VCD Track Search Time Track -:--:---- DVD Note: 1 Time searches for an exact time in Search the movie. -:--:-Track/Chapter --/-Time 2 In Title/Chapter mode, you cannot select a value outside the range of the total number of titles or chapters. 3 For some DVD discs, the Search Function is unavailable.
Advanced Playback During DVD or CD/VCD playback, press and hold to to scan forward. The player will review the disc at 2, 4, 8 and 16 time normal speed as follows. X2 X4 X8 X16 play Press PLAY to resume normal playback. During DVD or CD/VCD playback, press and hold to scan in reverse. The player will review the disc at 2, 4, 8 and 20 time normal speed as follows. X2 X4 X8 X16 play Press PLAY to resume normal playback. STOP Press STOP once during playback to stop and hold playback.
Advanced Playback PLAY Press PLAY from stop mode to start playback This function is not available if the elapsed time of current track is less than 10 seconds. Note: MP3 disc and some DVD discs do not have a 10 second review feature. DISC MENU During DVD, press MENU to return to the program menu. In the Setup Menu, press MENU to return to the main menu or play mode. Any time, press MENU to cancel the current OSD or some menus. Note: This function is subject to the discs.
Advanced Playback Please use the [PROG] mode under the state stopping! While [PROG] is on, press ENTER to display the [Program] submenu: Input the track numbers in the order you would like them to play. When finished, select [Play Program] and then press ENTER to play the tracks in the new programmed order. Select [Clear All] and press ENTER to clear all the numbers you have input. Input the title number and the chapter number in the desired order.
Advanced Playback N/P Press N/P when in STOP mode to select the mode from NTSC/PAL/AUTO. SLOW STEP REPEAT Press SLOW repeatedly to SLOW DOWN motion playback at variable speeds. Press STEP during playback to pause playback. Press STEP repeatedly to play frame. Press PLAY to resume normal playback. Select to press REPEAT to select Repeat Title, Repeat chapter, Repeat off during DVD playback. Press REPEAT to select Repeat Single, Repeat All and Repeat off when PBC is off (VCD, CD, SVCD).
Advanced Playback RETURN VOL+ VOL- PBC MUTE Press RETURN to the main menu when PBC is on. Press button to increase Volume. Press button to reduce volume till no volume output. During VCD playback. Press PBC (playback control) to select PBC on and off. Press MUTE to mute the Audio output. Press MUTE again to resume normal audio output.
Advanced Playback ZOOM During VCD/SVCD/DVD playback, press ZOOM to magnify the image as follows: Q1 Q2 Q3 Q Off ANGLE During DVD playback Press ANGLE to view scenes from different camera angles. Press ANGLE repeatedly to change from one camera angle to another. Note: This function is disc specific. AUDIO During CD/VCD/SVCD playback Press AUDIO to select a audio channel (STEREO, LEFT, RIGHT etc) During DVD playback Press AUDIO repeatedly to select from up to 8 audio languages/formats.
SPECIAL FUNCTION PLAYBACK AUDIO CD PLAYBACK When playing Audio CD disc, a navigation menu will be displayed automatically if the disc is loaded in succession. In the menu, use UP or DOWN button in the cursors to select the file, then press "ENTER/PLAY" to play this file, in this page, press PREV or NEXT can go to the previous or next page. Note: CD+G disc the same as Audio CD (when disc playing, press STOP button can return to navigation menu).
REFERENCE When you press SETUP key on the remote control, the setup menu will be displayed. 1. Within the setup menu, you can use UP, DOWN, LEFT and RIGHT buttons on the remote control to move the cursor, and then press the ENTER/PLAY button to make your selection. Press LEFT can return the previous menu. 2. To exit setup menu, you can press SETUP menu. 1.2 ANGLE MARK ANGLE MARK: Users can select a particular camera angle when playing a DVD which offers multiple angles.
REFERENCE 1.5 SCREEN SAVER General Audio Dolby 2.2 SPDIF OUTPUT Video Preferences - - General Setup Page - Tv Display Angle Mark Osd Lang Spdif Output Captions Screen Saver Ps Off Eng SPDIF OUTPUT MODE: Sets the audio outputs. Under the status of SPDIF/RAM, can not adjust volume of DVD, CD, can adjust only under MP3 format.
REFERENCE 3. DOLBY DIGITAL SETUP PAGE 3.1 DUAL MONO DUAL MONO: If your amplifier/decoder has Dolby Digital output,you may select stereo, left mono,right mono, or mixed mono mode for your amplifier decoder. General Audio Dolby 4.3 TV MODE SETUP PAGE TV MODE: Sets the scan mode of your TV. If there are picture interferences or no picture please press “V.MODE” to correct it.
REFERENCE General Audio Dolby Video 5.1 TV TYPE Preferences TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems. Brightness • 0 Press LEFT/ RIGHT button to adjust, then press ENTER/PLAY button to confirm and return upon menu. General Tv Type Audio Subtitle Disc Menu Parenta Password Default CONTRAST: Sets the contrast level of Video output. Audio Dolby Video Audio Dolby Video Preferences - - Preference Page - - 4.
REFERENCE 5.3 SUBTITLE 5.6 PASSWORD MODE SUBTITLE: Sets the preferred subtitle language as the default when playing DVD. (if DVD support these languages) General Audio Dolby Video PASSWORD CHANGE: You can change the password: please type 6 numerals as new password. Note: Be sure to remember the new password.
REFERENCE Please check the following guide for the possible cause and solution for a problem before contacting the nearest service centre or dealer for repairs. SYMPTOMS AND CORRECTIONS CORRECTIONS SYMPTOMS No power Check to make sure that the power connection is secure. Make sure the connection between the player and the TV is secure. No picture Make sure that the TV is in good working condition. Press "V.MODE" button continuously until it appear normal picture.
REFERENCE System and Outputs VF Signal system NTSC/PAL Frequence response CD: 20Hz-20KHz(EIAJ) DVD: 20Hz-44KHz(96KHz) (Sample result) 20Hz-22KHz(48KHz)(Sample result) Audio S/N ratio Video/Picture Audio >90 dB MPEG1 V2.0; MPEG2 MPEG LAYER2 standard Audio output (analog audio) Electric level output: 1.0 ~ 2.0V Resistance:10KS Audio output (digital audio) Electric level output: 0.5Vp--p Resistance: 75S Video output Electric level output: (1.0±0.
PALSONIC 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.