LCD TV TFTV-430 USER'S MANUAL PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Contents Safety Precautions ......................... 1 Important Safety Instructions ........................................................... 2 Overview of TV i. Panel Description ......................................................................... 4 ii. Back Panel Description ................................................................ 5 Antenna Connections ...................................................................... 6 Connections i. AV Connections .................................
Safety Precautions NOTE TO CABLE/TV INSTALLER: CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation.
Important Safety Instructions 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart. Apparatus combination to avoid injury from tip-cover. 1. Read These Instructions - All the safety and operating instructions should be read before the product is operated. 2. Keep These Instructions - The safety and operating instructions should be retained for future reference. 3.
Important Safety Instructions 23. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
Panel Description Overview of TV Press to display the menu of the available viewing sources. Press to display the OSD menu. Press to change the channel. The two buttons also act as direction buttons. Press to adjust volume level. The two buttons also act as direction buttons. Turn on/off the TV.
Back Panel Description Overview of TV Headphone Power Input Antenna Jack S-Video or Composite input RGB input Progressive input AV input -5-
Antenna Connections * For optimum picture quality, adjust antenna direction. Indoor Antenna Connections Typical Wall antenna jack used in apartment buildings, connect the antenna cable as shown below (Please use the correct type of antenna cable according to the type of wall antenna jack). 75 ohm Round Cable Bronze Wire 300 ohm Flat Wire Apartment buildings Antenna Converter Wall Connection Jack *If you have a 75 ohm round cable, insert the bronze wire and then tighten the connection nut.
AV Connections (Yellow) (Red) Audio Cable Composite Video Cable S-Video Cable Camcorder (White) Disc Player VCR Notes: You can connect the TV set with Disc player, Camcorder and VCR following the methods below : 1: S-Video Cable + Audio Cable. Please choose "S-Video" when you select the viewing source. 2: Video Cable + Audio Cable. Please choose "AV" when you select the viewing source.
DVD Player Connection DVD Player (White) (Red) Audio Cable Component Video Cable (Red) Audio Cable Progressive Scan Cable (White) Notes: Please refer to the methods below to connect TV with DVD Component signal: 1. Connect YCbCr Cable and Audio Cable to corresponding Jacks of DVD Please choose the "YCbCr" when you select viewing source. 2. Connect Progress Scan Cable and Audio Cable to the corresponding jacks of DVD. Please choose "YPbPr" when you select viewing source.
PC Connections Audio Cable VGA Cable Set-top Box Notes: Please refer to the upward method to connect TV with set-top Box or PC. 1. Connect VGA Cable and Audio Cable to the corresponding jack of PC or Set-top Box. Please choose "PC" or "YPbPr" when you select viewing source.
Remote Control Overview (All Functions Except Teletext) MUTE Power button Display status 1 Numeric buttons One/double/tri-digit select Previous channel Channel list Select different viewing signals Enter OSD setup mode Exit Enter Next/previous channel Volume up/down Sound mode selection Dual sound selection To freeze current image To set sleep power off time Select image display mode Aspect PIP function Play/Pause Rotate Image page up and down Stop Nine pictures Zoom in/out -10-
Remote Control Overview (Teletext Functions) On Screen Display Power ON/Standby button Sound Off 1 Teletext Page Up Teletext Cancel Teletext Index Teletext Page Down Teletext List/Flof Teletext Display/Mix Teletext Reveal Teletext Store Teletext Size Teletext Hold Teletext Sub-Page -11-
Remote Control Operation Batteries installation Remote control direction Point the remote control at the remote sensor. Pull the battery cover upward in the direction shown by the arrow and remove it. Insert the batteries with correct polarity. Replace the battery compartment cover. Make sure there are no objects between the remote control and its sensor. Don't place the remote control near a heater or in a damp place. A strong impact on remote control may damage it.
Basic Operation Turn On/Off 1. Connect the antenna cable to the antenna input port on TV. 2. Connect the adapter to the power input port on TV. 3. Put the power line plug into the jack of adapter. 4. Plug the power cord into the wall power outlet after connecting the power cord to the adapter. Then the TV will be in standby mode. 5. Press "POWER" button on the remote control to turn on the TV. 6.
Basic Operation Menu Description If you want to adjust the display settings, please follow the instruction below. Press the "MENU" button to browse the PICTURE MENU, TV MENU,OPTION MENU, PC MENU in turn. Press "EXIT" to quit menu mode.
Picture Menu Menu Operation Display Performance Adjust You can adjust brightness, contrast and colour to meet your favourite picture requirement. Press the "MENU" button to select " Picture" mode. Press " " buttons to select the item you want to adjust. Press " " buttons to reach the desired setting. Press " EXIT" button to quit. Picture TV Brightness Contrast Colour Tint Sharpness Option 64 59 25 6 Note: 1. In PC and YPbPr modes, only "Brightness/ Contrast" items are available. 2.
TV Menu Menu Operation Channel Setting --- Auto Searching You can set TV program list with Auto Searching function quickly. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". TV Press the " Press the " Channel Preset " button to enter "Channel Preset". " buttons to select "Auto Searching". Auto Searching Fine Tune Manual Searching TV SYS Press " " button, the TV will search channels automatically.
TV Menu Menu Operation Channel Setting- --- Fine Tune "Fine tune" helps you adjust specific programs image and sound quality. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " Press the " TV Channel Preset " button to enter "Channel Preset". " buttons to select "Fine Tune". Auto Searching Fine Tune Manual Searching TV SYS Select "Fine Tune" and press " " button to enter the item .
TV Menu Menu Operation Channel Setting --- TV system switch You can also set program list one by one by "Manual searching" function. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Press the " Press the " " button to enter "Channel Preset". " buttons to select "Manual Searching". Press the " " button to enter "Manual Searching".
TV Menu Menu Operation Channel Setting --- TV system switch You can change TV system by yourself if necessary. Press the "MENU" button to select "TV" mode. Press the " " buttons to select "Channel Preset". Picture TV PC Option Channel Preset Channel Exchange Press the " " button to enter "Channel Preset". Press the " " buttons to select "TV SYS". Press " " buttons and choose the suitable system for local TV signal: B/G , D/K.
TV Menu Menu Operation Channel Setting --- Channel Exchange If you'd like to exchange the two channels, please use "Channel Exchange". Select current channel from one of the two channels to be exchanged. Press the "MENU" button to select "TV" mode. Press " " buttons to select "Channel Exchange". Press " " button to enter the menu.
Option Menu Menu Operation Option Setting --- OSD setting If you want to change the OSD setting, please enter this menu. Press "MENU" button to select "Option" mode. Select "OSD Set" item, press " " button to enter. Press " " buttons to select the sub item. Press " " buttons to change the setting. Picture TV PC Option OSD Set Timer Setting Display Setting Teletext Setting Six options of OSD Language: English / French / Spanish /Russian / Chinese /Arabic.
Option Menu Menu Operation Option Setting --- Colour Temperature Adjust You can change colour temperature to get a better image effect according to the current circumstance. Press "MENU" button to select "Option" mode. Press " " buttons to select "Display Setting". Picture TV PC Option OSD Set Timer Setting Display Setting Teletext Setting Press " Press " " button to enter the sub item. " buttons to Select "Color Temperature".
Option Menu Menu Operation PIP Function PIP means picture in picture, the unit can display a sub window on the screen, which displays the program from another video source. This feature is valid when Main Window is in PC mode. You can watch TV or other video on the sub window. PIP Please make sure TV set is in PC mode first. Press "PIP" button to display the "Sub Source" Menu: Sub Source Press the direction buttons to select the source of sub window. Press "ENTER" button to enter the menu.
Option Menu Menu Operation Display Performance Adjust In "PIP" mode, you can adjust sub window as follows. Press the "MENU" button to select "Option" mode. Press the " " buttons to select "Display Setting". TV Picture Option PC OSD Set Timer Setting Display Setting Teletext Setting Select "PIP Setting" with " press " " button to enter. " buttons and Display setting Color Temperature PIP Setting Auto Adjust Aspect Press " Press " " buttons to select the sub menu. " buttons to change the setting.
Option Menu Menu Operation Option Setting --- Auto Adjust You can use this function to adjust the display setting automatically. Press "MENU" button to select "Option" mode. Press " " buttons to select "Display Setting". Press " " button to enter. Picture TV Option PC OSD Set Timer Setting Display Setting Teletext Setting Press " " buttons to select "Auto Adjust". Press " " button to enter, then the TV will be in best performance after "Auto Adjust".
Option Menu Menu Operation Option Setting -- Teletext Setting In Teletext mode, you can enter the menu and set Teletext language and region. For the other operations, please refer to page 32. Press "MENU" button to select "Option" mode. Press " " buttons to select "Teletext Setting". Press " " button to enter. Picture TV PC Option OSD Set Timer Setting Display Setting Teletext Setting Press " " buttons to select the item to be changed. Press " " buttons to adjust the setting.
PC Menu Menu Operation PC Mode Note: You should set the video signal to "PC" mode before adjusting PC mode setting. Press "MENU" button to enter " PC " mode. Press" " buttons to select the item to be changed. Press " " buttons to adjust the setting. - Each item is described below: H Position: Press " " buttons to move the image left or right. V Position: Press " " buttons to move the image up or down. Clock: To adjust the horizontal frequency of the image. Phase: To adjust the image phase.
Functional Button Instruction Mute MUTE Press the button to mute audio, press again to resume. Volume Adjustment Press "VOL+" button to increase the volume; Press "VOL-" button to decrease the volume. VO L VOL+/- Use the numerical buttons to select the channel directly Press this button one time to display "--"on the screen, the channel range will be 00-99. Use numerical buttons to enter two- digit channel number..
Functional Button Instruction Browse the channel list CH-LIST Press "CH-LIST" button, the Channel list will be displayed on screen. Channel list 5 CV 0 CCTV5 6 CCT 1 CCTV1 7 CC 2 CCTV2 8 CTV2 3 CCTV3 9 CC3 4 CCTV4 Current channel Use direction buttons to select specific channel. Use "Page Up" and "Page Down" button to switch the listing page. Press the "EXIT" button to quit. Rename Channel CH-LIST You can rename the channel when you are browsing the channel list.
Functional Button Instruction Exchange Channel CH-LIST You can also exchange two channels as follows. Press the "CH-LIST" button ,the channel list will be displayed on the screen. Channel list 5 CV 0 CCTV5 6 CCT 1 CCTV1 7 CC 2 CCTV2 8 CTV2 3 CCTV3 9 CC3 4 CCTV4 Current channel Use the direction buttons to choose specific channel. Press left button and the following window will be displayed on the screen. Exchange 1 7 OK Cancel After inputting the channel number with the numerical buttons.
Functional Button Instruction Freeze Image FREEZE Press the button to freeze the current image, press it again to exit the freeze mode. Note: Not available in PC&YPbPr modes. Image effect adjustment IMAGE After pressing "IMAGE" button, the following window will be displayed on the up-left corner of the screen: Image effect Bright Press direction buttons or "IMAGE" button to select your favourite image mode. Four options: Bright / Standard/ Mild and User mode. Note: Not available in PC&YPbPr modes.
Teletext Teletext is an information system broadcast by certain channels which can be consulted like newspaper. It also offers access to subtitles for viewers with auditive problems or those who are not familiar with the transmission language (cable networks, satellite channels, etc.). Teletext Language Selection. The default Teletext Language is English. If the Teletext language is not English in your selection, please kindly change the language according to the instruction on Page 26.
Teletext STORE You can store four page numbers in the current channel by pressing Store and numerical buttons. 1. Select the LIST mode using the List/Flof button, then four 3-digit numbers are displayed in different colours. 2. Press the colour buttons of corresponding page that will be replaced. 3. Enter the new page number using the numerical buttons. 4. Press the STORE button until the corresponding blocks blink. Notes: 1. Up to four different teletext pages can be stored from channel 0 to channel 40. 2.
Play Flash Memory Card Play Flash Memory Card You can enjoy the pictures in your flash card with the TV directly. Several formats files can be played. Flash Memory Card Flash memory card is a small, portable and universal IC recordable card, which has lager memory capacity than floppy disk. About E-album 1. Your TV set can display 900 million pixels JPEG picture. 2. JPEG expresses Joint Photographic Experts Group.
Play Flash Memory Card Play Music 1. Insert flash memory card into the card slot. Press the "SOURCE" button to display the main menu and select "Flash Card" with direction buttons. Then press "ENTER" button to confirm. 2. The following menu will be displayed on the screen: 0:02:40 MENU Root ROOT MODE FILE:mp3 1 Dir 1 Dir 2 Mp3 Dir 4 0 1 2 3 File Folder File Folder Normal 3. Your TV set will play the files at the root. To enter the folder, press " " button.
Play Flash Memory Card Select a folder -- Dirl, then press" ENTER" button and the screen will display as follows. MENU Dir1 Dir2 JPEG Dir4 MODE 0 1 2 3 4 5 6 .. 001 002 003 004 005 006 Folder Normal PLAY/PAUSE Press " " button to pause the slide show. Press " " again to continue the slide show. Press "PAGE" button to view previous or next picture. Press " " button to stop slide show and return to the menu. ROTATE Two Rotate modes you can select. Anti-clock wise and clock wise.
Stand Uninstallation Please follow the instructions given. 1. Lay the LCD TV/Monitor face-down on a flat surface with a cushion or other soft materials to protect the screen. 2. Remove all cables connected on the TV/Monitor 3. Remove the four screws and then remove the stand from the LCD TV/Monitor. 4. Reconnect all cables you removed in step 2. 5. Now you are ready to install Wall/Arm mounting device.
Maintenance Care for your TV Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have with your TV. Be sure to turn the power off and pull out the plug before you begin any cleaning. Screen Cleaning 1. Here is a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. 2.
Trouble Shooting Please read this user's manual before using the TV set. If you have any troubles in using this TV set, try to solve it by the suggestions mentioned below. If you can not remove the trouble after adopting corresponding suggestions, please contact the technical service centre or dealer authorised by us. For the sake of your safety, please do not open the cover and repair by yourself, or it may cause further damage to the TV set, electric shock or fire.
Specifications Power Supply Input: AC 110 - 240V, 50Hz/60Hz Output: DC 12V / 4A Power Consumption Standby: <3W Max: 50W Frequency Horizontal: 30 - 80KHz Vertical: 50 - 75Hz Colour System NTSC / PAL/SECAM VGA Sync.: H/V Separate, TTL, P. or N. Video Signal: 0.7Vp-p, 75ohm Audio Audio in: RCA JACK (MR) , 0.5Vrms (-9dB) Frequency Response: 80Hz-15KHz (at -3dB) Earphone out: Max. 10mW Output (3.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 FKV2.037.