User manual

Installation (continued)
12
The PC input signal connection
Connect the VGA (D-sub) input interface on the TV to the output of PC equipment through Min D-sub 15
pin cable as illustrated. For the audio connection, use an audio cord that matches the audio output terminal
on the computer.
If you select PC signal, please set the input signal source of LCD TV to RGB mode.
(Not supplied)
1. The native display resolution is 640 x 480. If the signal resolution exceeds this resolution, it may not be
possible to show fine detail with sufficient clarity.
2. We strongly recommend that you set the refresh rate on the PC to 60Hz. If you set it above 60Hz, the unit
may not display correctly. (Control Panel/Display Settings)
3. Use OSD to make final image adjustments.
Notes:
Audio cable
VGA
cable