OWNER'S MANUAL 106CM CORDLESS REMOTE PLASMA TELEVISION MODEL: PDP4280HD N111 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Table of Contents Table of Contents ......................................................................................................................................................... Important Safety Precautions ....................................................................................................................................... Introduction ...............................................................................................................................................
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product.
Important Safety Precautions (continued) 12. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer's instructions.
Important Safety Precautions (continued) 22. Power source---This product is intended to be supplied by a listed power supply indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
Introduction Front Panel - The pictures are for function illustration purpose only. - Here shown may be somewhat different from your TV. - Please take the TV as the standard. MENU TV AV VOL+ VOLCH+ CH- ITEM /BUTTON NAME FUNCTION DESCRIPTION TV AV Press to select the input source. MENU Press to bring up the main menu to the screen. VOL +/ VOL- Press to increase or decrease the sound level. CH +/ CH - Press to scan through channels.
Introduction (continued) Rear Panel HDMI 2 HDMI 1 VGA AUDIO VGA VIDEO IN 1 R L COMPONENT 1 VIDEO IN 2 L R COMPONENT 2 VIDEO OUT L R VIDEO IN R L SPDIF RF IN AC IN JACK NAME FUNCTION DESCRIPTION AC IN AC power input for PDP4280HD TV RF IN Connect the antenna SPDIF Port for TV audio output R/L VIDEO OUTPUT AV audio video signal output terminal R/L VIDEO IN 1 2 3 AV audio video signal input terminal COMPONENT 1 2 Connect the YPbPr output terminals of DVD VGA Connect the VGA o
Introduction Remote Control Overview Standby Mute Number buttons Recall Favourite List Source Zoom Volume Up/Down Channel Up/Down Information Menu Arrows Arrows Exit OK Sleep Timer Freeze Audio Channel List Reveal Picture Mode Sound Mode Electronic Program Guide TV/Radio Index Subtitle Update Hold TTX Size Mix Red button Blue button Green button Yellow button 7
Basic Operation Power On/Off 1. Connect the TV unit to power source using power cord. 2. When the power indicator in red, the TV is in standby mode. Now press the "POWER" button on remote control or front panel to turn on the TV. The TV works normally when the power indicator is in green. 3. Switch the TV to standby mode, just press "POWER" button on the remote control or front panel. Now the indicator will be in red. 4. The power consumption is less than 1W in standby mode.
Menu Operation If you want to adjust the display settings, please follow the instruction below. Press the "MENU" and " " buttons to browse the Channel Menu, Picture Menu, Sound Menu, Time Menu, Option Menu and Lock Menu in turn. Press "OK" or " " button to enter into the submenu. Press " " button to select items and " " button to adjust it. Press "MENU" button to return to previous menu. Press "EXIT" button to exit "MENU" mode.
Menu Operation (continued) Channel Menu DTV Manual Tuning (only available in DTV mode) You can also set program list again one by one by "Manual Search" function. DTV Manual Tuning UHF CH Press " " button to select channel. 67 Please select channel then Press " OK " button to search.
Menu Operation (continued) Picture Menu Press "MENU" and " " buttons to select the PICTURE MENU. Press " " button to select items. PICTURE Standard Picture Mode Contrast Brightness Color Sharpness Tint 75 45 50 50 0 MENU EXIT OK Picture Mode Press " " button to select among Dynamic Standard Mild and User modes. Contrast Press " " button to adjust the contrast of the picture. Brightness Press " " button to adjust the brightness of the picture. Color Press " " button to adjust the colour saturation.
Menu Operation (continued) Sound Menu Press "MENU" and " " buttons to select the SOUND MENU. Press " " button to select items. SOUND Sound Mode Standard Treble 50 Bass 50 50 Balance Auto Volume Off Surround Sound Off EXIT MENU OK Sound Mode Press " " button to select among Standard Music Movie Sports and User. Treble Press " " button to adjust the level of the higher pitcher sounds. Bass Press " " button to adjust the level of the lower pitcher sounds.
Menu Operation (continued) Option Menu Press "MENU" and " " buttons to select the OPTION MENU. Press " " or "OK" to enter the Submenu. OPTION Language English Country Australia Blue Screen Off Restore Factory Default MENU EXIT OK Blue Screen Press " " button to turn on off the function of blue screen. With this function on when no signal is received in analog TV mode, the TV will display a mild blue screen. Restore Factory Default Enter the password.
Menu Operation (continued) Lock Menu Set Password Press number buttons to enter the new password. Please enter password New - - - Confirm - - - - Note: If you forgot the password Please enter the super code 1090. Block Program (Only available in TV mode) Press " " to select the items. Programme Edit TV TV Press the green button to lock the channel Press ''EXIT'' button to exit.
Unique Button Operation Important Unique Buttons RECALL Press "RECALL” button to restore the former channel. ZOOM Press "ZOOM” button to select among Auto 4 3 16 9 Zoom1 Zoom2 Channel List LIST Press "LIST" button to display the channel list Press "CH+/CH-" button to page up or down the channel list. Press " " to select the items. Press "OK" button to enter the channel. Press "EXIT" button to exit.
Important Unique Buttons (continued) Important Unique Buttons EPG (only available in DTV mode) Press ''EPG’' button to display the Electronic Programme Guide You can check the program information for the next 7 days (If the information is available from the broadcaster) Press " " button to select the channel. Press " " and yellow button to select the time. Press INFO button to show the information of the program.
Teletext Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.). TEXT Press the TEXT button to activate the Teletext mode. MIX Press MIX button to view the TV program with teletext page. You can return to normal viewing by press the "MIX" button.
Troubleshooting Before calling for repair service, check the following items for possible remedies to an encountered symptom. Symptoms Check item "Ghost" or double images This may be caused by obstruction to the antenna due to high rise buildings or hills. Using a highly directional antenna may improve the picture. No power Check that the AC power cord is plugged into the mains socket. Unplug the power cord, wait for 60 seconds. Then reinsert plug into the mains socket and turn on the unit again.
Care and Maintenance Do not use in hot or cold rooms (locations) When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the PDP panel to malfunction.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
