Owner's manual

Recording from another tape (dubbing)
Recording CDs with synchro start
RECORDING
15
,
SET
The synchro start function gives you a very comfortable way of copying (tracks of) CDs to a tape.
buttons on the machine
Select the CD function.
Open the disc compartment to load a disc.
Select the disc you want to record.
To find a track to be recorded.
A short pause before recording starts.
Stop your recording.
buttons on the machine
Select the TAPE function.
Load a tape with enough free recording time into TAPE 1.
Load the prerecorded tape (the one to be dubbed)
into TAPE 2.
Set recording TAPE 1 to pause.
Start TAPE 2 to play.
Stop your recording.
If the tape is not rewound completely, rewind it first.
If you want to start at the current position, press REC button.
Use only good quality tape cassettes.
Keep cassettes away from excessive moisture or dust, magnetic and electrical fields
(loudspeakers and computer monitors, for example)
Always wind the tape to the beginning when you have finished.
Store the cassette in its cover.
You can protect your precious recordings from being wiped by breaking out the safety tab on the
side of the cassette.
Should you wish to re-use the tape after removing the tab, cover the hole with adhesive tape.
TAPE 1: To playback prerecorded and to
record tapes.
TAPE 2: Only to play prerecorded tapes
Start your recording.
TUNE DOWN TUNE UP