INSTRUCTION MANUAL PORTABLE RADIO CASSETTE RECORDER WITH CD PLAYER PRC-510 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
1. SAFETY PRECAUTIONS For your own protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions, and instructions on the appliance, or the ones described in the operating instructions, and adhere to them.
TOP VIEW 1. CD LED DISPLAY 2. FUNCTION SELECTOR (CD, TAPE, TUNER) 3. POWER LED DISPLAY 4. FM STEREO INDICATOR 5. HEADPHONE JACK 6. CD CONTROL KEYS (PLAY/PAUSE, STOP, REPEAT( 1, ALL), SKIP UP/DOWN) 7. FM ROD ANTENNA 8. TUNING DIAL 9. TUNING WHEEL 10. BAND SELECTOR (AM/ FM/ FM STEREO) 11. VOLUME CONTROL 12. CASSETTE CONTROL KEYS 2. BATTERY OPERATION 1. Open the battery compartment cover. 2.
3. RADIO OPERATION 1. Set the function selector switch to the TUNER position. 2. Slide the Band switch to the AM, FM or FM STEREO position. 3. Tune a desired station by turning the TUNING wheel. 4. To turn the radio off, set the function selector switch to the TAPE position. FM STEREO indicator. It will light up when receiving a stereo signal in FM STEREO mode.
4. CD PLAYER OPERATION LOADING CD 1. Press down the CD door and open the door. 2. Load a disc with label side upwards and close the door. PLAYING CD 1. Set the function selector switch to the CD position. 2. Load a CD with label side upwards and close the door. If no disc or damaged If a disc contains disc, the display 15 tracks, the shows "--". display show "15". 3. To play, press the PLAY/ PAUSE button. SUSPEND PLAYBACK Press the PLAY/PAUSE button once during play. 4.
5. CASSETTE DECK OPERATION PLAYBACK 1. Set the function selector switch to the TAPE position. 2. Insert a prerecorded cassette tape 3. To playback, press the PLAY button. 4. To stop playback, press the STOP / EJ button. When the end of tape is reached, the tape will automatically stop. SUSPEND PLAYBACK To suspend playback, press the PAUSE button. To resume playback, press the PAUSE button again. REWIND OR FAST FORWARD TAPE F.
TAPE RECORDING - FROM RADIO 1. Set the function selector to TUNER position. 2. Select the desired band. 4. Insert a blank tape. 3. Tune in the desired station. 5. To record, press the RECORD button. 6. To stop recording, press the STOP / EJ button. Recording automatically stops, when the tape is completed. TAPE RECORDING - FROM CD PLAYER 1. Set the function selector switch to CD position. 2. Load a disc in the compartment and close the door. If necessary select a track by pressing the SKIP buttons.
6. TECHNICAL SPECIFICATION GENERAL Power Source ............................................................ Power Consumption .................................................. Dimensions (W x D x H) ............................................ Weight ....................................................................... RADIO Frequency Range ..................................................... 240V/50Hz 12 W 363 x 251 x 173 (mm) 2.4 kg AM : 522-1620kHz FM : 87.5-10MHz CASSETTE SECTION Tape Speed ....
