LED TV PT6525SU OWNER'S MANUAL Please read this manual carefully before TV operation. Retain it for future reference. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
Important Safety Instructions and Maintenance Important Safety Instructions High Voltage Do not open CAUTION Risk of electronic shock, do not open.Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. If the following problems occur: Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur.
Important Safety Instructions and Maintenance Important Safety Instructions An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.Ensuring the television is not overhanging the edge of the supporting furniture.
Important Safety Instructions and Maintenance Installation When the TV being moved in from cold place, it needs some right time for dew inside unit evaporating fully before turn on the unit; Move To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. LED Screen Although the LED screen is made with high precision technology and 99.
Important Information If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer os the television. • Only using furniture that can safely support the television. • Ensuring the television is not overhanging the edge os the supporting furniture.
Accessories Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
Introduction Features l l l l l l l l l l l l TV adopts 65" TFT LED display screen Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV/monitor combo. Android 6.0 USB 2.
Introduction Specifications Model PT6525SU Display size 65" Diagonal (max.) LED panel resolution 3840X2160 Speaker output power ≥5 W X2 Power supply 160-240V~, 50/60Hz TV receive system Digital: DVB-T/T2, DVB-C Analog: PAL: BG, I, DK, SECAM: BG, D/K Frequency range Analog: Antenna: 46.25MHz-855.25MHz Digital: DVB-T/T2:5-12,21-69 DVB-C:113MHz~898MHz Video in PAL/NTSC/SECAM Power consumption 210W Standby comsumption ≤0.
Stand and wall-mounting instructions (optional) How to assemble the stand If you need to remove or assemble the stand please read the following instructions. -Before attaching/detaching the stand, make sure to turn off the TV. -Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged. Assembling instruction: Put the television on the table, fix the stands with screws given in the carton.
General Description Overview of back panel You can connect the TV with video devices such as DVD/VCD player, VCR and video camera to enjoy the high quality picture.
General Description Overview of front panel The buttons on the lower-left panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Directly in front the TV operation schematic diagram: 1 Joystick The control panel on the back shell 2 6 3 4 5 ON OFF 7 Press this button on the control panel one time as CONFIRM at any menu. 1 Centre Press and hold this button to display FUNCTION menu at any menu.
General Description Overview of Remote Control 1. INPUT: This button is used to switch among different sources. Select a source and press OK button to confirm. 2. POWER: Press this button to switch to standby mode, and press it again to turn TV on. 3. REC LIST: Press this button to display a list of recorded programs in DTV. 4. TV: Press this button to enter TV source. 5. Arrow buttons: Press these buttons to move cursor up / down / left / right for menu. 6.
General Description Overview of Remote Control 17. Digital buttons(0~9): To select channel with digital buttons. 18.INFO: This button is used to display source information or current program information. 19. RECALL: Switch to the previous program. 20. : Use as backward function in USB Video/Audio playing Mode. Use as reveal function in ATV Text Mode. 21. : Use as Play/Pause function in USB Video/Audio playing Mode. Use as TimeShift function in DTV. 22.
General Description Installing Batteries in the Remote Control Installing Batteries 1 Open the battery compartment cover on the back side. 2 Insert two 1.5V AAA size batteries in correct polarity. Don´t mix old or used batteries with new ones. 3 Closed the cover. Point the remote towards the remote control sensor of the TV and use it within 8 meters. Put the used batteries into the recycling bin since they can negatively affect the environment.
External Connection Connecting VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system. Skip step 1 if you have not yet connected to an antenna or a cable system.
External Connection Connecting a Camcorder The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR. Each Camcorder has a different back panel configuration. When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.
External Connection Connecting DVD Player/Set-Top Box via HDMI This connection can only be made if there is a HDMI Output connector on the external device. TV Rear Panel RF HDMI 1 (ARC) HDMI 2 HDMI Cable (Not supplied) What is HDMI? HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression.
External Connection Connecting Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Digital Audio System TV Rear Panel (Black) 5V 500mA USB 2 SPDIF USB 1 OPTICAL TF Optical Cable (Not supplied) COMPONENT/AV IN Y/V Pb Pr L 5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH. R Connect an Coaxial Cable between the Coaxial jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
Supporing Signals Input Mode DTV Digital: DVB-T/T2, DVB-C SECAM BG DK CVBS Input Resolution 480i 480p 576i Component 576p 720p 1080i 1080p 480p 576p 720p HDMI 1080i 1080p 3840x2160 Vertical Frequency 60Hz 60Hz 50Hz 50Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 60Hz 50Hz 50Hz/60Hz 50Hz/60Hz 50Hz/60Hz 24Hz/25Hz/30Hz/60Hz 18
Supporing Signals This TV is embedded with one digital media player. It can find devices that support USB1.1/2.0, including flash disk, USB hard disk and digital camera. It supports functions as: Display picture, Play music files, Play video files. Note: Please do not remove the cable during the data transfer. It may cause problems for the system. JPEG, PNG, BMP Picture Codec Music Audio Codec MP-(1/2/3), AAC, AC3 Container MPG, MPEG, MP4, MKV, 3GPP, AVI, FLV HD/FHD: MPEG-(1/2/4), MVC, H.264, H.
Basic Operation Setup Wizard When first boot the TV, you will enter the TV guide system. OSD Language Setting Welcome English START 1. Press ▲/▼ key to select the language. 2. Press ► key then press “START” button to enter the SMART page. Country Setting Setup your country Algeria Australia Austria NEXT STEP 1. Press ▲/▼ key to select the type of your country (Algeria/Australia/Austria). 2. Press ► key then press “NEXT STEP” button to enter the next step.
Basic Operation Setup Wizard Network Settings Setup your network Skip Wireless Wired NEXT STEP 1. Press ▲/▼ key to select the type of your network(Skip/wired/wireless). 2. Press ► key then press “NEXT STEP” button to enter the next step. Setup Wifi 1. You should wait about 5-8s to display the wifi list. 2. Press ▲/▼ key to select the type of your wifi.
Basic Operation Setup Wizard Setup Wired network Setup wired network DHCP STATIC NEXT STEP 1. Press ▲/▼ key to select the type of your set up the way(DHCP/STATIC). 2. Press ► key then press “NEXT STEP” button to enter the next step.
Basic Operation Setup Wizard MENU OPERATION 1 2 3 4 5 6 7 8 9 10 11 Arrow buttons: Select an item on the menu. OK button: Enter the options which you've selected. 1. Google Search 2. Current Time 3. What's hot: Hot Video on Internet. 4. Featured app: featured apps on Internet for TV. 5. Inputs: Input sources on TV(DTV, ATV, AV, YPbPr, HDMI1, HDMI2, USB1, USB2). 6. Apps: All applications installed on TV. 7. Settings: All Setting Options on TV. 8. Net Status: Display your network status.
Basic Operation Setup Wizard Quick Menu Quick Menu Image Sound PVR Option CEC Program Edit Audio Language Subtitle Language In TV source, there is a Quick Menu for some Options you may want to use. MENU button: Open the Quick menu or Exit the menu. BACK button: Exit the menu. Arrow buttons: Select an option which you want. OK button: Enter the option you have selected.
Menu system instruction Setting Preferences Date & time: You can make the adjustment of the date and time; Language: You can change the language that you need; Keyboard: Configure of the keyboard; Search: Google search. Image PICTURE MODE Picture Mode Standard BackLight 100 Aspect Ratio 16:9 Noise Reduction Low Colour Temp Cool BACK Back MENU Exit Your TV has these picture settings (Soft, Vivid, User, Dynamic, Standard) that are preset at the factory.
Menu system instruction Image Backlight Adjust Backlight. 1. Press ▲/▼ key to select “Backlight” option. 2. Press ◄/► key to adjust Backlight value. Aspect Ratio You can select the picture size which best corresponds to your viewing requirement. 1. Press ▲/▼ key to select “Aspect Ratio” option. 2. Press ◄/► key to set the scale mode. You can also press “Aspect” key on the remote control to select one of the scale modes. Each source has different scale modes. Noise Reduction 1.
Menu Menusystem systeminstruction instruction Sound Equalizer 120HZ 50 500HZ 50 1.5KHZ 50 5KHZ 50 10KHZ 50 BACK Back MENU Exit 1. Press ▲/▼ key to select an equalizer item. 2. Press OK key to enter the equalizer submenu. The sound settings can be adjusted to suit your user preferences. 1. Press ▲/▼ key to select a particular item. 2. Press◄/►key to decrease or increase the value of a particular item. Note: The adjusted values are stored according to the selected particular item.
Menu Menusystem systeminstruction instruction Sound HDMI Sound This option is only used in HDMI mode. 1. Press ▲/▼ key to select "HDMI Sound" option. 2. Press ◄/► key to select HDMI Sound mode. Note: HDMI Sound is just enabled in source HDMI. AD This option is only used in DTV mode. 1.Press ▲/▼ key to select “AD” option. 2.Press ◄/► key to select “On” or “Off”. AD Volume 1.Press ▲/▼ key to select “AD Volume” option. 2.Press ◄/► key to decrease or increase the value of the item.
Menu system instruction Channel Auto Tuning Auto Tuning DTV+ATV Service Type Belgium France Italy Spain Turkey Algeria Egypt CH: 0 ATV: 0 0 DTV: MENU RADIO: Skip BACK 0 DATA: Exit Press ▲/▼ key to select "Auto Tuning" option. You can select country in the list view and set "Search Type" option. The number of searched channels will be shown on the screen. If you set "Tune Type" to "DTV+ATV", when the searching of DTV channels is over, TV will start to search ATV channels.
Menu system instruction Channel ATV Manual Tuning ATV Manual Tuning ATV Manual Tuning 62.25MHZ 62.25MHZ 1 Fine Tune Start Search Fine Tune Color System PAL Sound System BG Skip Off In the ATV/DTV source, you can choose "ATV Manual Tuning" to enter "ATV Manual uning" menu. Current CH: You can see the current channel number and you can press ◄/►button to choose the channel you want to modify. Color System: Select the "Color System" option, press ◄/► on the remote control or TV.
Menu system instruction Program Program Edit Program Edit 1 ATV 2 ATV 3 ATV 4 ATV 5 ATV 6 ATV 7 ATV 8 ATV 9 ATV 10 ATV OK Delete Skip Fav Lock Move You can use ▲/▼ button to choose "Program Edit" and enter the menu, press the color button on the remote control to skip, delete and lock programs, or add programs to your favorite list. Delete: You can press RED button to delete the selected channel, then choose the channel you want to delete and press RED button again to delete.
Menu system instruction Program Signal Information (Used only in DTV) Signal Information Sof tware Version 1 Channel 37 Frequency 592 Nine Melb Network Transport stream 1072 Service 1074 Modulation 64QAM Signal Strengh: Signal Quality: 1. Press ▲/▼ key to select "Signal Information" option. 2. Press "OK" or ► key, you can see the information of the DTV channel.
Menu system instruction Function Lock System PVR Option CEC OSD Time 15 Seconds Screen Saver Off No signal standby On BACK Back MENU Exit OSD Time: Set the preferred amount of time for the OSD to be displayed on the screen. Lock (Optional) Lock System On Parental Control Off Set Password BACK Back MENU Exit 1. Press “Enter” key to select "System Lock" submenu. 2. Press ◄/► key to select "On" or "Off".
Menu system instruction Function Set Password Lock System On Parental Control Off Input Password: Set Password Old Password New Password Comfirm Password Back BACK MENU Exit 1. Press “OK” key to select "Set Password" option. 2. Enter your 4-digit password to set the old password. Choose any 4-digits for your new password and enter them. As soon as the 4 digits are entered, the cursor ill skip to “Confirm password” item, re-enter the same 4 digits, and your new password has been memorized.
Menu system instruction Function Consumer Electronics Control (CEC) is an HDMI feature designed to allow the user to command and control up-to 15 CEC - enabled devices ,that are connected through HDMI, by using only one of their remote controls (for example by controlling a television set, set-top box, and DVD player using only the remote control of the TV). 1. Press ▲/▼ button to select “CEC” option. 2. Press OK button to enter “CEC” setting submenu. This option is used to enable or disable CEC. 1.
Menu system instruction Function CEC Control CEC On Auto Standby Off Auto Power on On ARC On CEC Control Power Root Menu CEC Control Setup Menu Device List BACK Back Menu MENU Exit This option enables the TV to control the device linked to it. 1. Press ▲/▼ button to select “CEC Control” option. 2. Press OK button to enter the “CEC Control” submenu. Power 1. Press ▲/▼ button to select “Power” option. 2. Press OK button to power off the device linked to the TV. Root Menu 1.
Menu system instruction Function No Signal StandBy 1. Press ▲/▼ button to select “No Signal StandBy” option. 2. Press ◄/► button to choose “On” or “Off”. If set “On”, TV will auto standby after 10 minutes in “No Signal” states. HDMI Edid Mode (Optional) This option is only used in HDMI mode. 1.Press ▲/▼ button to select “HDMI Edid Mode” option. 2.Press ◄/► button to switch HDMI Edid Version.
Menu system instruction Time On Timer Timers On timer On timer Off Timer 12:30 PM Inputs DTV In "On Timer” item, press OK button to enter the submenu, set the time to turn on the TV set, when the TV set is in the standby mode. You can set a desired source to be displayed automatically when you start TV in "Source" menu. Off Timer In "Off Timer" item, press OK button to enter the submenu, set the time to turn off the TV set.
Menu system instruction Time Sleep Timer Timers Sleep timer Off 10 minutes 20 minutes 30 minutes 60 minutes 1. Press ▲/▼key to select "Sleep Timer" option. 2. Press ◄/► key repeatedly until the desired time appears (Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min). Notes: 1. The sleep timer you have set will be cancelled when the TV turns off or if a power failure occurs 2. When the time is up, remind information will be displayed on screen. Press any key button to cancel timer function.
Menu system instruction PVR Select Disk: Press "OK" button to enter submenu and press "◄/►" to choose the disk for PVR. Time Shift Size: Press ◄/► to choose the size. Format Disk: Press "OK" button to enter format submenu. The disk must be formatted when first used for PVR. Do not disconnect disk or turn power off during formatting. When formatting your disk, a progress bar will appear on the display. Note: The larger your device the longer it will take to format.
Menu system instruction DTV DTV EPG (Electronic Program Guide) In DTV mode, press "GUIDE" button to enter the Electronic Program Guide. At Guide menu, press "RED" button to "Record" Setting. At Guide menu, press "OK" button to "Reminder Settings". Note: Press ◄/►button to adjust the scheduled time, press "OK" button to save the setting. Screen Shot You can capture current picture by pressing Yellow button more than 1 second, and picture preview will automatically pop up if the capture succeeded.
Troubleshooting If you have any problem, check the couter measures for each symptom listed below. The following symptoms may have been. caused by inappropriate adjustment rather than actual malfunction of the unit. If the trouble persists, contact the Customer Care Centre, see back page for contact details. Symptoms Possible solutions No power Please check the power cord plugged in and that the power outlet works. Unplug the power cord and plug it in after 60 seconds and restart the TV.
Troubleshooting After Auto Tuning only some channels are available Check your area is covered by Digital Video Broadcasts. Try re-tuning or manually tuning missing channels. Check that you are using the correct antenna type. Channel cannot be selected Check if the channel has been blocked in the main menu settings. USB not playing Please check connecting USB cable and power supply is connected. Hard drive has not been formatted.